OMERO.server installation¶
This section covers the installation of OMERO.server on UNIX and UNIX-like platforms. This includes all BSD, Linux and Mac OS X systems. Depending upon which platform you are using, you may find a more specific walk-through listed below but we recommend you read through this page first as it explains the entire process rather than just being a series of commands. The walk-throughs describs how to install the recommended versions, not all the supported versions. This should be read in conjunction with Version requirements.
Since 5.6, a new OMERODIR
variable is used, you should first unset OMERO_HOME
(if set) before beginning the installation process.
Recommended:
- OMERO.server installation on CentOS 7
Instructions for installing OMERO.server from scratch on CentOS 7 with Ice 3.6 and Python 3.6.
- OMERO.server installation on Debian 10
Instructions for installing OMERO.server from scratch on Debian 10 with Ice 3.6 and Python 3.7.
- OMERO.server installation on Ubuntu 18.04
Instructions for installing OMERO.server from scratch on Ubuntu 18.04 with Ice 3.6 and Python 3.6.
Upcoming:
- OMERO.server installation on Debian 9
Instructions for installing OMERO.server from scratch on Debian 9 with Ice 3.6 and Python 3.5.
- OMERO.server installation on Ubuntu 16.04
Instructions for installing OMERO.server from scratch on Ubuntu 16.04 with Ice 3.6 and Python 3.5.
Development:
- OMERO.server installation on OS X with Homebrew
Instructions for installing and building OMERO.server on Mac OS X with dependencies installed using Homebrew. It is aimed at developers since typically MacOS X is not suited for serious server deployment.
Prerequisites¶
Installation will require:
a clean, minimal operating system installation
a “root” level account for which you know the password
Note
If you are unsure of what it means to have a “root” level account, or if you are generally having issues with the various users/passwords described in this install guide, please see Which user account and password do I use where?.
The installation and configuration of the prerequisite applications are mostly outside the scope of this document. For Linux distributions, use of the default package manager is recommended. For MacOS X, Homebrew is recommended. This guide provides the package names to install for a number of contemporary systems. However, the names and versions provided vary between releases. Please do check for similar packages if the one documented here is not available for your system as it may be provided under an alternative name. “Debian” refers to Debian and derivative distributions such as Ubuntu. “RedHat” refers to RedHat and related distributions such as CentOS, Fedora and Scientific Linux.
For Ubuntu you need to enable the universe repository. This should be enabled by default. If not enabled, it may be enabled by editing
/etc/apt/sources.list
directly, in which case the entries may already exist but are commented out, or by using Synaptic (10.04 and 10.10) or Ubuntu Software Center (11.04 onwards). Update your package lists to ensure that you get the latest packages:$ sudo apt-get update
Install packages by running:
$ sudo apt-get install package
where package is the package name to install.
The following subsections cover the details for each package, in the order recommended for installation.
Java SE Runtime Environment (JRE)¶
If possible, install one of the following packages:
System |
Package |
---|---|
Debian |
openjdk-11-jre |
Homebrew |
N/A (install Oracle Java) |
RedHat |
java-11-openjdk |
OMERO works with the OpenJDK JRE provided by most systems, or with Oracle Java. Version 11 or later is required.
Your system may already provide a suitable JRE, in which case no extra steps are necessary. Linux distributions usually provide OpenJDK, and older MacOS X versions have Java installed by default. Oracle Java is no longer provided by BSD or Linux distributions for licensing reasons. If your system does not have Java available, for example on newer MacOS X versions, or the provided version is too old, Oracle Java may be downloaded from the Oracle website.
Warning
Security
Installing Oracle Java outside the system’s package manager will leave your system without regular distribution-supplied security updates, and so is not recommended.
To check which version of Java is currently available:
$ which java
/usr/bin/java
$ java -version
openjdk version "11.0.5" 2019-10-15
OpenJDK Runtime Environment (build 11.0.5+10-post-Ubuntu-0ubuntu1.118.04)
OpenJDK 64-Bit Server VM (build 11.0.5+10-post-Ubuntu-0ubuntu1.118.04, mixed mode, sharing)
Python 3¶
Check you have Python (and check its version) by running:
$ python3 --version
Python 3.6.4
If possible, install the following packages:
System |
Package |
---|---|
Debian |
python3 |
Homebrew |
python3 |
RedHat |
python3 |
Ice¶
The Ice version may vary, depending upon the distribution version you are using. The Ice versions in currently supported versions of Debian and Ubuntu are shown in the Ice of the Version requirements page.
Using version 3.6 of Ice is required. If your package manager provides Ice packages, using these is recommended where possible. Distribution-provided packages often have additional bugfixes which are not present in the upstream releases.
If needed, source and binary packages are available from ZeroC. The latest release is available from the ZeroC website.
Note
ZeroC Ice can always be built from source code for specific platforms if a binary package is not available.
Note
With Ice 3.6, the Python bindings are provided separately. If
your package manager does not provide Ice python packages, run
pip install zeroc-ice
to install the Ice Python bindings.
See Using the Python Distribution
for further details.
OMERO.scripts¶
If you wish to run the “Movie Maker” script, please install mencoder.
System |
Package |
---|---|
Debian |
mencoder |
Homebrew |
mplayer |
RedHat |
mencoder |
Installation¶
Once the above prerequisites have been downloaded, installed and configured appropriately, the OMERO server itself may be installed. You may wish to create a user account solely for the purpose of running the server, and switch to this user for the next steps.
Server directory¶
Firstly, a directory needs to be created to contain the server. In
this case ~/omero
is used as an example:
$ mkdir -p ~/omero
Next, change into this directory:
$ cd ~/omero
OMERO.server¶
The release OMERO.server.zip
is available from the
OMERO downloads page. Download the version matching
the version of Ice installed on your system before continuing.
Installing a development version from source is also possible. See the Installing OMERO from source section for further details. This is not recommended unless you have a specific reason not to use a release version.
Once you have obtained the OMERO.server zip archive matching the version of Ice installed, unpack it:
$ unzip OMERO.server-5.6.1-ice36-byy.zip
If your system does not provide an unzip command by default, install one of the following:
System |
Package |
---|---|
Debian |
unzip |
Homebrew |
unzip |
RedHat |
unzip |
Optionally, give your OMERO software install a short name to save some
typing later, to reflect what you set OMERO_PREFIX
to in the
Environment variables section, below:
$ ln -s OMERO.server-5.6.1-ice36-byy OMERO.server
This will also ease installation of newer versions of the server at a later date, by simply updating the link.
Environment variables¶
If using distribution-provided packages such as Debian or RPM packages, or via the homebrew or macports package manager, it should not be necessary to set any environment variables. However, if using third-party packages for any required components, several variables may require setting in order for them to function correctly.
Please note that the precise details of these environment variables can change as new versions of software are released.
There are several methods for setting environment variables; which is most appropriate will depend upon how the OMERO server is started. Options include:
/etc/security/pam_env.conf
Global environment set at login by PAM
/etc/profile
or/etc/profile.d/omero
Global Bourne shell defaults (also used by derived shells such as bash and zsh)
~/.profile
User’s Bourne shell defaults (also used by derived shells)
/etc/bash.bashrc
Global bash defaults
~/.bashrc
,~/.bash_profile
or~/.bash_login
User’s bash configuration.
If OMERO is started as a service using an init script, a global setting should be preferred. If being started by hand using a particular user, a user-specific configuration file may be more appropriate.
The following environment variables may be configured:
LD_LIBRARY_PATH
(Linux) orDYLD_LIBRARY_PATH
(MacOS X)The Ice and PostgreSQL libraries must be on the library search path. If using the packages provided by your distribution, this will already be the case. If using third-party binary distributions the
lib
(orlib64
if present and using a 64-bit system) directory for each will require adding to the library search path.OMERO_PREFIX
This is not strictly required, but may be set for convenience to point to the OMERO server installation, and is used in this documentation as a shorthand for the installation path.
OMERO_TMPDIR
Directory used for temporary files. If the home directory of the user running the OMERO server is located on a slow filesystem, such as NFS, this may be used to store the temporary files on fast local storage.
PATH
The search path must include the programs java, python, icegridnode and PostgreSQL commands such as psql. If using the packages provided by your distribution, this will already be the case. If using third-party binary distributions such as the ZeroC Ice package, Oracle Java, or PostgreSQL, the
bin
directory for each must be added to the path. The OMERObin
directory may also be added to the search path ($OMERO_PREFIX/bin
ifOMERO_PREFIX
has been set).PYTHONPATH
The Ice
python
directory must be made available to python. If using the Ice packages provided by your distribution, this will already be the case. If using the ZeroC ice package, add thepython
directory to the python path. For Ice 3.6, this should never be required.OMERODIR
The path to the OMERO.server.
After making any needed changes, either source the corresponding file
or log back in for them to take effect. Run env
to check them.
Creating a database¶
On most systems, a “postgres” user will be created which has admin
privileges, while the UNIX root
user itself does not have admin
privileges. Therefore it is necessary to either become the
postgres
user, or use sudo as shown below.
For the purposes of this guide, the following dummy data is used:
Username: db_user
Password: db_password
Database: omero_database
Warning
Security
These dummy values are examples only and should not be used. For a live or public server install these values should be altered to reflect your security requirements—i.e. use your own choice of username and password instead. These should not be the same username and/or password as your Linux/Mac root user!
You should also consider restricting access to your server machine, but that is outside the scope of this document.
Create a non-superuser database user and record the name and password used. You will need to configure OMERO to use this username and password later on.:
$ sudo -u postgres createuser -P -D -R -S db_user Enter password for new role: # db_password Enter it again: # db_password
Create a database for OMERO to reside in:
$ sudo -u postgres createdb -E UTF8 -O db_user omero_database
Check to make sure the database has been created, you have PostgreSQL client authentication correctly set up and the database is owned by the db_user user.
$ psql -h localhost -U db_user -l Password for user db_user: List of databases Name | Owner | Encoding ----------------+----------+----------- omero_database | db_user | UTF8 postgres | postgres | UTF8 template0 | postgres | UTF8 template1 | postgres | UTF8 (4 rows)
If you have problems, especially with the last step, take a look at OMERO.server and PostgreSQL since the authentication mechanism is probably not properly configured.
Location for the your OMERO binary repository¶
Create a directory for the OMERO binary data repository.
/OMERO
is the default location and should be used unless you explicitly have a reason not to and know what you are doing.This is not where you want the OMERO application to be installed, it is a separate directory which the OMERO.server will use to store binary data.
You can read more about the OMERO binary repository.
$ sudo mkdir /OMERO
Change the ownership of the directory.
/OMERO
must either be owned by the user starting the server (it is currently owned by the system root) or that user must have permission to write to the directory. You can find out your username and edit the correct permissions as follows:$ whoami omero $ sudo chown -R omero /OMERO
Configuration¶
You can view a parsed version of the configuration properties under Configuration properties glossary or parse it yourself with
omero config parse
.Change any settings that are necessary using
omero config
, including the name and/or password for the ‘db_user’ database user you chose above or the database name if it is not “omero_database”. (Quotes are only necessary if the value could be misinterpreted by the shell. See Forum post)$ omero config set omero.db.name 'omero_database' $ omero config set omero.db.user 'db_user' $ omero config set omero.db.pass 'db_password'
You can also check the values that have been set using:
$ omero config get
If you have chosen a non-standard OMERO binary repository location above, be sure to configure the
omero.data.dir
property. For example, to use/srv/omero
:$ omero config set omero.data.dir /srv/omero
Create the OMERO database initialization script. You will need to provide a password for the newly created OMERO root user, either by using the
--password
argument or by entering it when prompted. Note that this password is for the root user of the OMERO.server, and is not related to the root system user or a PostgreSQL user role.$ omero db script --password omero_root_password
Using OMERO5.4 for version Using 0 for patch Using password from commandline Saving to /home/omero/OMERO5.4__0.sql
Warning
Security
For illustrative purposes, the default password for the OMERO root user is shown as
omero_root_password
. However, you should not use this default values for your installation, but use your own choice of password instead. This should not be the same password as your Linux/Mac root user or the database user!
Initialize your database with the script.
$ psql -h localhost -U db_user omero_database < OMERO5.4__0.sql
At this point you should see some output from PostgreSQL as it installs the schema for new OMERO database.
Before starting the OMERO.server, run the OMERO diagnostics script to check that all of the settings are correct, e.g.
$ omero admin diagnostics
You can now start the server using:
$ omero admin start Creating var/master Initializing var/log Creating var/registry No descriptor given. Using etc/grid/default.xml
If multiple users have access to the system running OMERO you should restrict access to the
OMERO.server/etc
andOMERO.server/var
directories, for example by changing the permissions on them:$ chmod 700 ~/omero/OMERO.server/etc ~/omero/OMERO.server/var
You should also consider restricting access to the OMERO data repository. The required permissions will depend on whether you are using Advanced import scenarios.
Test that you can log in as “root”, either with the OMERO.insight client or on the command-line:
$ omero login Server: [localhost] Username: [root] Password: # omero_root_password
You will be prompted for an OMERO username and password. Use the username and password set when running omero db script.
If your users are going to be importing many files in one go, for example multiple plates, you should make sure you set the maximum number of open files to a sensible level (i.e. at least 8K for production systems, 16K for bigger machines). See Too many open files for more information.
JVM memory settings¶
The OMERO server starts a number of Java services. Memory settings for these are calculated on a system-by-system basis. An attempt has been made to have usable settings out of the box, but if you can afford to provide OMERO with more memory, it will certainly improve your overall performance. See Memory configuration on how to tune the JVM.
Enabling movie creation from OMERO¶
OMERO has a facility to create AVI/MPEG Movies from images. The page OMERO.movie details how to enable it.
Post-installation items¶
Backup¶
One of your first steps after putting your OMERO server into production should be deciding on when and how you are going to backup your database and binary data. Please do not omit this step.
Security¶
It is also now recommended that you read the Server security and firewalls page to get a good idea as to what you need to do to get OMERO clients speaking to your newly installed OMERO.server in accordance with your institution or company’s security policy.
Advanced configuration¶
Once you have the base server running, you may want to try enabling some of the advanced features such as OMERO.dropbox or LDAP authentication. If you have Flex data, you may want to watch the HCS configuration screencast. See Configuration properties glossary on how to get the most out of your server.
Troubleshooting¶
My OMERO install doesn’t work! What do I do now? Examine the Troubleshooting OMERO page and if all else fails post a message to our ome-users mailing list discussed on the Community support page. Especially the Server fails to start and Remote clients cannot connect to OMERO installation sections are a good starting point.
OMERO diagnostics¶
If you want help with your server installation, please include the output of the diagnostics command:
$ omero admin diagnostics ================================================================================ OMERO Diagnostics 5.6.1 ================================================================================ Commands: java -version 11.0.5 (/usr/bin/java) Commands: python -V 3.6.9 (/opt/omero/server/venv3/bin/python) Commands: icegridnode --version 3.6.5 (/usr/bin/icegridnode) Commands: icegridadmin --version 3.6.5 (/usr/bin/icegridadmin) Commands: psql --version 11.6 (/usr/bin/psql) Commands: openssl version 1.1.111 (/usr/bin/openssl) Server: icegridnode running Server: Blitz-0 active (pid = 30324, enabled) Server: DropBox active (pid = 30343, enabled) Server: FileServer active (pid = 30345, enabled) Server: Indexer-0 active (pid = 30348, enabled) Server: MonitorServer active (pid = 30351, enabled) Server: OMERO.Glacier2 active (pid = 30353, enabled) Server: OMERO.IceStorm active (pid = 30376, enabled) Server: PixelData-0 active (pid = 30393, enabled) Server: Processor-0 active (pid = 30394, enabled) Server: Tables-0 inactive (disabled) Server: TestDropBox inactive (enabled) OMERO: SSL port 4064 OMERO: TCP port 4063 Log dir: /opt/omero/server/OMERO.server/var/log exists Log files: Blitz-0.log 22.8 KB errors=0 warnings=9 Log files: DropBox.log 1.3 KB errors=0 warnings=1 Log files: FileServer.log 114 B Log files: Indexer-0.log 1.3 KB errors=0 warnings=5 Log files: MonitorServer.log 882 B Log files: PixelData-0.log 1.8 KB errors=0 warnings=4 Log files: Processor-0.log 592 B errors=0 warnings=1 Log files: Tables-0.log 841 B Log files: TestDropBox.log n/a Log files: master.err 34.4 KB errors=2 warnings=0 Log files: master.out empty Log files: Total size 0.06 MB Environment:OMERODIR=/opt/omero/server/OMERO.server Environment:OMERO_HOME=(unset) Environment:OMERO_NODE=(unset) Environment:OMERO_MASTER=(unset) Environment:OMERO_TEMPDIR=(unset) Environment:PATH=/opt/omero/server/venv3/bin:/usr/local/bin:/usr/bin:/bin Environment:ICE_HOME=(unset) Environment:LD_LIBRARY_PATH=(unset) Environment:DYLD_LIBRARY_PATH=(unset) OMERO SSL port:4064 OMERO TCP port:4063 OMERO data dir: '/OMERO' Exists? True Is writable? True OMERO temp dir: '/home/omero-server/tmp' Exists? True Is writable? True (Size: 0) JVM settings: Blitz-${index} -Xmx621m -XX:MaxPermSize=512m -XX:+IgnoreUnrecognizedVMOptions JVM settings: Indexer-${index} -Xmx414m -XX:MaxPermSize=512m -XX:+IgnoreUnrecognizedVMOptions JVM settings: PixelData-${index} -Xmx621m -XX:MaxPermSize=512m -XX:+IgnoreUnrecognizedVMOptions JVM settings: Repository-${index} -Xmx414m -XX:MaxPermSize=512m -XX:+IgnoreUnrecognizedVMOptions
Update notification¶
Your OMERO.server installation will check for updates each time it is started from the Open Microscopy Environment update server. If you wish to disable this functionality you should do so now as outlined on the OMERO upgrade checks page.