OMERO.dropbox

DropBox was originally designed as the first stage of the file system changes referred to as OMERO.fs. It utilizes a file system monitor to find newly uploaded files and run a fully automatic import on those files if possible. This release of OMERO.dropbox runs on the same machine as the OMERO.server and watches designated areas of the local filesystem for new or modified files. If those files are importable, then an automatic import is initiated. OMERO.dropbox is started automatically when the OMERO.server starts and it will run if the prerequisites below are met.

Prerequisites

In addition to the general System requirements OMERO.dropbox has the following more specific requirements:

  • OMERO.dropbox is built on underlying OS file-notification system, and so is only available for specific versions of certain operating systems. OMERO.dropbox has been tested on the following systems:

    • Linux with kernel 2.6.13 and higher.

    • Mac OS 10.6 and later.

  • In addition some platforms require further Python packages to be available:

    • Mac OS systems that use a macports install of Python will need to have FSEvents available in the PYTHONPATH. This will require a path of the form /System/Library/Frameworks/Python.framework/Versions/3.X/Extras/lib/python/PyObjC/ to be added, according to the version of Python used.

  • The filesystem which OMERO.dropbox watches must be local to the given operating system. Watching a network-attached share (NAS) is strictly *not* supported.

Installing DropBox

From the OMERO 5.6.0 release, the library omero-dropbox supports Python 3 and is now available on PyPI. We recommend you use a Python virtual environment to install it. It should be installed in the same virtual environment where omero-py is installed. See OMERO.server installation.

Activate the environment /opt/omero/server/venv3 where omero-py is installed and install omero-dropbox as root:

$ . /opt/omero/server/venv3/bin/activate
$ pip install omero-dropbox==\ |version_dropbox|

Enable DropBox as the omero-server system user (su - omero-server):

$ omero admin ice server enable MonitorServer
$ omero admin ice server enable DropBox

Using DropBox

In its default configuration the monitored area of the file system is a DropBox subdirectory of the OmeroBinaryRepository directory. The system administrator should create DropBox and then under that a directory for each user, using their omero username. The ownership and permissions should be set so that a user can copy files into their DropBox directory:

/OMERO/DropBox/amy
              /emily
              /edgar
              /root
              /zak

Experimenters can add subdirectories under their named directory for convenience. Copying or moving a file of an importable file type into a named directory or nested subdirectory will initiate an automatic import of that file for that user. Multi-file formats will be imported after the last required file of a set is copied into the directory. Images and plates will be imported into the default group of the user, with images placed into Orphaned images unless the target option was configured (see below and Import targets).

Acquisition systems can then be configured to drop a user’s images into a given DropBox.

Note

  • The DropBox system is designed for image files to be copied in at normal acquisition rates. Copying many files en masse may result in files failing to import.

  • It is also intended as a write-once system. Modifying an image after it has been imported may result in that modified image also being imported depending on the operating system and how the image was modified.

  • Once directories are created within DropBox or files are copied or moved into DropBox they should not be moved, renamed or otherwise changed. Images may be imported again or already imported images may become unreadable.

Permissions

Changing the permissions of a directory within DropBox may result in duplicate imports as a newly readable directory appears identical to a new directory. If directories need to be modified it is recommended that the DropBox system is stopped and then restarted around any changes, as below.

As the omero-server system user, run

$ omero admin ice server disable DropBox
$ omero admin ice server stop DropBox
$ omero admin ice server disable MonitorServer
$ omero admin ice server stop MonitorServer

# make any directory changes

$ omero admin ice server enable MonitorServer
$ omero admin ice server enable DropBox

Note

Any new files copied into DropBox during this disabled period will not be detected and thus not imported.

Log files

The log files var/log/FileServer.log, var/log/MonitorServer.log and var/log/DropBox.log will indicate success or otherwise of start-up of the two components. Once running, var/log/MonitorServer.log will log file events seen within designated file areas and var/log/DropBox.log will log the progress of any file imports.

Unicode path and file names

If file or path names contain Unicode characters this can cause DropBox to fail. This can be remedied by the use of a sitecustomize.py or usercustomize.py file containing the following:

import sys
reload(sys)
sys.setdefaultencoding('utf-8')

For more details on using customization files in Python see: site — Site-specific configuration hook. For more discussion on this issue within OMERO see the forum post: Dropbox halts on certain unicode characters.

Note

If a customization file is used and the OMERO server is upgraded please ensure the file is still available to DropBox after the upgrade.

Advanced use

OMERO.dropbox can be configured in several ways through etc/grid/templates.xml. In its default configuration, as detailed above, it monitors the subdirectory DropBox of the OMERO data directory for all users.

A number of the properties in templates.xml accept a semi-colon separated list of values. This extended configuration allows a site to watch multiple directories, and configure each for a different user, a different type of file, etc. Any value missing from the configuration (e.g. value="1;;2") will be replaced by the default value.

One example alternative configuration would be to watch specific directories for specific users.

Note

Temporarily, the “importUsers” parameter is disabled, because of a bug. You can still configure the DropBox in a way which gives all the users the same Advanced configs. To achieve this, do not specify the “importUsers” parameter and always just use the “amy” or just the “zak” part of the other parameters or concatenate the “zak” parameters with “amy” parameters in the examples below.

In the example below two directories are monitored, one for user amy and one for zak:

<property name="omero.fs.importUsers"  value="amy;zak"/>
<property name="omero.fs.watchDir"  value="/home/amy/myData;/home/zak/work/data"/>

The remaining properties have been left at their default values for both users.

To limit DropBox to import only files belonging to specific image types the following property can be set,

<property name="omero.fs.readers"  value="/home/amy/my_readers.txt;"/>

Here only the image types listed in my_readers.txt will be imported for the user amy while the system-wide readers.txt will be used for zak.

For a full description of the properties see below.

Properties

Each property takes the form of a single item or a semi-colon separated list of items. Where the item is a list, values within that list should be comma separated.

  • importUsers (temporarily disabled)

    The importUsers is either default or a list of OMERO user names. In the case of the value being default, the same configuration is applied to all users and each subsequent configuration setting should be a single value. In the case of this value being a list of users, each subsequent value should be a list of the same length as the number of users. The default value is default.

    <property name="omero.fs.importUsers"  value="default"/>

  • watchDir

    The absolute directory path of interest for each user. The default is empty.

    <property name="omero.fs.watchDir"  value=""/>

  • eventTypes

    For automatic import Creation and Modification events are monitored. It is also possible to monitor Deletion events though these are not used by DropBox. The default is Creation,Modification.

    <property name="omero.fs.eventTypes"  value="Creation,Modification"/>

  • pathMode

    By default existing and newly created subdirectories are monitored. It is possible to restrict monitoring to a single directory (“Flat”), only existing subdirectories (“Recurse”), or all subdirectories (“Follow”). For DropBox to function correctly the mode should be Follow. The default is Follow.

    <property name="omero.fs.pathMode"  value="Follow"/>

  • whitelist

    A list of file extensions of interest. An empty list implies all file extensions are monitored. The default is an empty list.

    <property name="omero.fs.whitelist"  value=""/>

  • blacklist

    A list of subdirectories to ignore. Not currently supported.

    <property name="omero.fs.blacklist"  value=""/>

  • timeout

    This timeout in seconds is used by one-shot monitors. This property is not used by DropBox.

    property name="omero.fs.timeout"  value="0.0"/>

  • blockSize

    The number of events that should be propagated to DropBox in one go. Zero implies all events possible. The default is zero.

    <property name="omero.fs.blockSize"  value="0"/>

  • ignoreSysFiles

    If this is True events concerning system files, such as filenames beginning with a dot or default new folder names, are ignored. The exact events ignored will be OS-dependent. The default is True.

    <property name="omero.fs.ignoreSysFiles"  value="True"/>

  • ignoreDirEvents

    If this is True then the creation and modification of subdirectories is not reported to DropBox. The default is True.

    <property name="omero.fs.ignoreDirEvents"  value="True"/>

  • dirImportWait

    The time in seconds that DropBox should wait after being notified of a file before starting an import on that file. This allows for companion files or filesets to be copied. If a new file is added to a fileset during this wait period DropBox begins waiting again. The default is 60 seconds.

    <property name="omero.fs.dirImportWait"  value="60"/>

  • fileBatch

    The number of files that can be copied in before processing the batch. In cases where there are large numbers of files in a typical file set it may be more efficient to set this value higher. The default is 10.

    <property name="omero.fs.fileBatch"  value="10"/>

  • throttleImport

    The time in seconds that DropBox should wait after initiating an import before initiating a second import. If imports are started too close together connection issues can arise. The default is 10 seconds.

    <property name="omero.fs.throttleImport"  value="10"/>

  • readers

    A file of readers. If this is a valid file then it is used to filter those events that are of interest. Only files corresponding to a reader in the file will be imported. The default is empty.

    <property name="omero.fs.readers"  value=""/>

  • importArgs

    A string of extra arguments supplied to the importer. This could include, for example, an email address to report failed imports to: --report --email test@example.com. The default is empty. For details on available extra arguments see Import images.

    <property name="omero.fs.importArgs"  value=""/>

Example

Here is a full example of a configuration for two users:

<property name="omero.fs.importUsers"     value="amy;zak"/>
<property name="omero.fs.watchDir"        value="/home/amy/myData;/home/zak/work/data"/>
<property name="omero.fs.eventTypes"      value="Creation,Modification;Creation,Modification"/>
<property name="omero.fs.pathMode"        value="Follow;Follow"/>
<property name="omero.fs.whitelist"       value=";"/>
<property name="omero.fs.blacklist"       value=";"/>
<property name="omero.fs.timeout"         value="0.0;0.0"/>
<property name="omero.fs.blockSize"       value="0;0"/>
<property name="omero.fs.ignoreSysFiles"  value="True;True"/>
<property name="omero.fs.ignoreDirEvents" value="True;True"/>
<property name="omero.fs.dirImportWait"   value="60;60"/>
<property name="omero.fs.fileBatch"       value="10;10"/>
<property name="omero.fs.throttleImport"  value="10;10"/>
<property name="omero.fs.readers"         value="/home/amy/my_readers.txt;"/>
<property name="omero.fs.importArgs"      value="-T \"regex:^.*/(?<Container1>.*?)\";--report --email zak@example.com"/>

See also

Import images

Import targets

In-place import