Import targets¶
The CLI import options -d or -r can be used to specify, respectively,
the import target Dataset or Screen by ID. The -T, --target option adds
more ways of specifying the import target.
The general form of the target argument is:
<action or Class>[:<discriminator>]:<pattern>
where the discriminator is optional. Thus a target must contain one or two colons. Any further colons will be read as part of the pattern. If the discriminator is omitted a default will be used depending on the action or Class. Currently the following actions and classes are supported: Dataset, Screen and regex.
Importing to a Dataset or Screen¶
For Dataset and Screen the currently supported discriminators are name
and id. If the discriminator is omitted the default used is id. So:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:id:2
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:2
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -d 2
will all have the same effect of importing the image to the Dataset with ID 2.
The name discriminator can be used to select the target by name, and so:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:name:Sample01
will import the image to the Dataset with name Sample01. If more than one Dataset exists with the specified name the most recently created will be used. If no Dataset exists with the specified name a new Dataset will be created for the import.
The choice of Dataset can be specified by adding a qualifying character to the
discriminator: + to use the most recent, - to use the oldest, % to
only import if there is a unique target or @ to create a new container
even if one with the correct name already exists.
For example:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:+name:Samples
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:-name:Samples
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:%name:Samples
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:@name:Samples
The first case is equivalent to the previous example, the most recent Dataset will be used. In the second case the oldest Dataset will be used. In the third case the import should fail if multiple datasets with that name exist. In the first three cases a new Dataset will be created if none exists. In the last case a new Dataset should be created even if one or more already exist.
If the name contains spaces or other characters that cannot be used on the command line the pattern should be enclosed in quotes:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:name:"New Dataset"
To import a plate to a Screen target the same syntax can be used as in all the examples above, for example:
$ omero import ~/images/bd-pathway/2015-12-01_000/ -T Screen:+name:Pathway
Importing to a Dataset inside a specific Project¶
To import an image into a Dataset contained in a specific Project, use:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Project:name:"Proj1"/Dataset:name:"New Dataset"
The above command will create a new Project Proj1 and link the Dataset
New Dataset to it, except in case a Project named Proj1 already exists.
Then, the Dataset named New Dataset will be linked to this existing
Project.
Analogically, a new Dataset named New Dataset will be created for the
import of the image and linked to the Project Proj1, except in case a
Dataset New Dataset already exists. Then, the existing Dataset will be used
for the import of the image and linked to Project Proj1.
Note that New Dataset could have been linked prior to your import to some
other Project (for example ProjP). In such a case, the New Dataset will
be linked both to ProjP and Proj1 after the import.
Importing using regular expressions¶
The local path of the file to be imported can be used to specify the target
Dataset or Screen using a regular expression using the action regex. For
this action the only discriminator is name and if the discriminator is
omitted the qualified form of this +name will be used. The sequence
(?<Container1>.*?) is a named-capturing group used to specify the Dataset
or Screen name in the regular expression, the specific name Container1
must be used here. For example:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T "regex:^.*images/(?<Container1>.*?)"
would use a Dataset with name being the path following images/,
in this case dv.
The name discriminator can be explicitly used and, as in the previous
section, also qualified:
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T "regex:+name:^.*images/(?<Container1>.*?)"
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T "regex:-name:^.*images/(?<Container1>.*?)"
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T "regex:%name:^.*images/(?<Container1>.*?)"
$ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T "regex:@name:^.*images/(?<Container1>.*?)"
These each work in the same way as the previous Dataset examples.
In some cases the importable files may be in nested directories, this is often the case with plates and some multi-image formats. A regular expression can be used to pick a higher level directory as the Screen or Dataset name. For example, if several BD Pathway HCS files are under the following paths:
~/images/bd-pathway/week-1/2015-12-01_000/
~/images/bd-pathway/week-2/2015-12-09_000/
~/images/bd-pathway/week-2/2015-12-11_000/
and the intended Screens for the import are week-1 and week-2 then
the following could be used:
$ omero import ~/images/bd-pathway/ -T "regex:+name:^.*bd-pathway/(?<Container1>[^/]*)/.*"
which would import one Plate into the Screen week-1 and two Plates into
the Screen week-2, creating those Screens if necessary.
A useful way of determining the nested structure to help in constructing
regular expressions is the option -f which displays the used files but
does not import them:
$ omero import -f ~/images/bd-pathway/week-1
...
2016-03-30 15:58:56,574 701 [ main] INFO ome.formats.importer.ImportCandidates - 59 file(s) parsed into 1 group(s) with 1 call(s) to setId in 92ms. (99ms total) [0 unknowns]
#======================================
# Group: /Users/colin/images/bd-pathway/week-1/2009-05-01_000/Experiment.exp SPW: true Reader: loci.formats.in.BDReader
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/Experiment.exp
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/20X NA 075 Olympus Confocal.geo
...
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/Well D11/DsRed - Confocal - n000000.tif
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/Well D11/DsRed - Confocal - n000001.tif
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/Well D11/DsRed - Confocal - n000002.tif
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/Well D11/Transmitted Light - n000000.tif
which shows that all the files for one particular Plate from the example above are under:
/Users/colin/images/bd-pathway/week-1/2009-05-01_000/
For more information on the regular expression syntax that can be used in templates see: java.util.regex.Pattern documentation.
Importing to targets across groups¶
Currently, in all the above cases the import target must be in the user’s current group for the import to succeed. It is hoped that this limitation can be removed in a later version of OMERO. This is also pertinent if the target is likely to be created as it will be created in the current group, which may not be the group intended.
If no group is specified by using the omero login -g option as part of the
import, the current group will be dependent on the user’s login status:
- If the user is currently logged in then their current group will be the one they are logged in to.
- If the user is logged out but has active sessions then the most recent session will be used to connect and that will determine the current group.
- If the user is logged out and has no active sessions then the current group will be their default group.
If the user knows which group the import target is in, or needs to be created in, then one of the following methods can be used to ensure the target group is the current group for the import:
Explicitly log in using the
omero login -goption before running the import command:$ omero login -g group_name $ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:2
Provide the
omero login -goption as part of the import command:$ omero import -g group_name ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:2
Use omero sessions group to switch group before running the import command:
$ omero sessions group 51 $ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:2
Use the
omero login -koption to reconnect to an active session for the target group:$ omero login -k c41a6f78-ba6e-4caf-aba3-a94378d5484c $ omero import ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:2 # or alternatively $ omero import -k c41a6f78-ba6e-4caf-aba3-a94378d5484c ~/images/dv/SMN10ul03_R3D_D3D.dv -T Dataset:2
The session ID can be found using the omero sessions list command.
For further information on the commands omero login and omero sessions see Manage sessions.
Note
The omero login -g option requires the group name as its argument,
while the omero sessions group subcommand uses either the group
ID or the group name.
