In-place import

In-place import allows files which are already present on the server machine to be imported into OMERO without the need to copy them. This requires users to have shell (SSH, etc.) access to the server machine, and so there are a number of limitations to this implementation. Development of this feature is on-going, with improvements planned to enable a more user-friendly experience. This CLI-based stop-gap is being made available at this stage because for some users, in-place import is essential for their use of OMERO.

This feature is designed to allow imaging facilities to import large datasets into OMERO while keeping them safely stored in a secure repository which is read-only for users. Leaving the data in a user’s file system is very dangerous as they may forget they need to keep it or move to a different institution. Under no circumstances should in-place import be used with temporary storage.

Warning

The instructions below should help you get started but it is critical that you understand the implications of using this feature. Please do not just copy commands and hope for the best.

Responsibilities

As a data management platform, OMERO assumes that it is in control of your data in order to help prevent data loss. It assumes that data was copied into the server and only a server administrator or authorized OMERO user would have the rights to do anything destructive to that data.

With in-place import, the data either resides completely outside of OMERO or is shared with other users. This means that the critical, possibly sole, copy of your data must be protected outside of OMERO. This is your responsibility for the lifetime of the data.

Limitations

In-place import is only available on the OMERO server system itself. In other words, using SSH or similar, you will need to shell into the server and run the command-line importer directly. If you are uncomfortable with this, you should let someone else handle in-place importing.

Someone wanting to perform an in-place import MUST have:

• a regular OMERO account
• an OS-account with access to bin/omero
• read access to the location of the data
• write access to the ManagedRepository or one of its subdirectories

The above means that it may be useful to create a single OS account (e.g. “import_user”) which multiple users can log into, and then use their own OMERO accounts to import data. Alternatively, each OMERO user can be given an OS account with access rights to the data storage as well as the managed repository.

For soft linking with --transfer=ln_s it has been noticed that some plate imports run rather more slowly than usual. Other operations may also be affected. In determining if or how to use in-place import at your high-content screening facility, we thus recommend time profiling with representative data, and alerting us to any significant disappointments.

Also, there is still some data duplication when pyramids are generated. We are hoping to find a work-around for this in the future.

Safety tips

Whether you chose to use the hard- or soft-linking option below, you should take steps to secure files which are in-place imported to OMERO. The best option is making them read-only for both the OMERO user and also for the owner of the data. This means the server cannot accidentally modify the files (e.g. if a client mixes up the file IDs and tries to write to the wrong location) and that the files cannot be removed from the system while OMERO is still using them. Files may not be renamed or otherwise altered such that the OMERO server user cannot find them at the expected location.

If possible, all the files should be added to your regular backup process. If the files for imported images are later removed or corrupted, the result will probably be that while the images remain in their projects or screens with their annotations and basic metadata, they simply cannot be successfully viewed. However, this behavior is not guaranteed, so do not assume that the resulting problems will not extend further. Once the problem is noticed, replacing the original image files from backups, in the same place with the same name, is likely but not guaranteed to fully restore the images and their associated data in OMERO.

Additional setup requirements

In-place import requires additional user and group setup. As no one should be allowed to log into the account used to install the server, to permit in-place imports you need to create a different user account, allowing someone to log into the server but not accidentally delete any files. Therefore, you should set up an ‘in-place’ user and an ‘in-place’ group and configure a subset of directories under ManagedRepository to let members of that group write to them. Important criteria include:

• In-place users can write to directories that are newly created for import so that they may link out to the original file locations.
• In-place users cannot write to directories not required for their imports.
• In-place users cannot corrupt or delete each other’s imports.
• OMERO.server can read and delete all the imported files.

One may achieve the above with careful setting of sticky bits and choice of umasks or use of ACLs. The best approach depends on the background of your system administrators and the capabilities of the underlying filesystems. The example below details how this was done for one of our test servers in Dundee which runs with the default setting for omero.fs.repo.path:

### STATUS BEFORE

[sysadmin@ome-server omero_system_user]$ umask
0002

[sysadmin@ome-server omero_system_user]$ ls -ltrad ManagedRepository/
drwxrwxr-x 8 omero_system_user omero_system_user 4096 Apr 24 10:13 ManagedRepository/

[sysadmin@ome-server omero_system_user]$ grep inplace /etc/passwd /etc/group
/etc/passwd:inplace_user:x:501:501::/home/inplace_user:/bin/bash
/etc/group:omero_system_user:x:500:inplace_user
/etc/group:inplace_user:x:501:

[sysadmin@ome-server omero_system_user]$ grep omero_system_user /etc/passwd /etc/group
/etc/passwd:omero_system_user:x:500:500::/home/omero_system_user:/bin/bash
/etc/group:omero_system_user:x:500:inplace_user

[sysadmin@ome-server omero_system_user]$ sudo -u inplace_user -i
[inplace_user@ome-server ~]$ umask
0002


### SCRIPT
chgrp inplace_user /repositories/binary-repository/ManagedRepository
chmod g+rws /repositories/binary-repository/ManagedRepository

chmod g+rws /repositories/binary-repository/ManagedRepository/*
chmod g+rws /repositories/binary-repository/ManagedRepository/*/*
chmod g+rws /repositories/binary-repository/ManagedRepository/*/*/*

chgrp inplace_user /repositories/binary-repository/ManagedRepository/*
chgrp inplace_user /repositories/binary-repository/ManagedRepository/*/*
chgrp inplace_user /repositories/binary-repository/ManagedRepository/*/*/*

# With the above, newly created directories should be in the inplace group
# As long as the file is readable by omero_system_user, then it should work fine!



### AFTER SCRIPT

[root@ome-server omero_system_user]# ls -ltrad ManagedRepository/
drwxrwsr-x 8 omero_system_user inplace_user 4096 Apr 24 10:13 ManagedRepository/

### TEST

# with default umask this likely has to do
[inplace_user@ome-server ~]$ cd /repositories/binary-repository/ManagedRepository/
[inplace_user@ome-server ManagedRepository]$ mkdir inplace.test
[inplace_user@ome-server ManagedRepository]$ ls -ltrad inplace.test/
drwxrwsr-x 2 inplace_user inplace_user 4096 Apr 30 11:35 inplace.test/

[omero_system_user@ome-server omero_system_user]$ cd /repositories/binary-repository/ManagedRepository/
[omero_system_user@ome-server ManagedRepository]$ rmdir inplace.test/
[omero_system_user@ome-server ManagedRepository]$

If you are controlling OMERO.server with systemd you should add UMask=0002 to the Service section of your systemd service file.

Getting started

The command-line import client has a help menu which explains the available options:

$ bin/omero import --advanced-help

ADVANCED OPTIONS:

  These options are not intended for general use. Make sure you have read the
  documentation regarding them. They may change in future releases.

  In-place imports:
  -----------------

    --transfer=ARG          	File transfer method

        General options:    	
          upload          	# Default
          upload_rm       	# Caution! File upload followed by source deletion.
          some.class.Name 	# Use a class on the CLASSPATH.

        Server-side options:	
          ln              	# Use hard-link.
          ln_s            	# Use soft-link.
          ln_rm           	# Caution! Hard-link followed by source deletion.
          cp              	# Use local copy command.
          cp_rm           	# Caution! Copy followed by source deletion.


  e.g. $ bin/omero import --transfer=ln_s foo.tiff
       $ ./importer-cli --transfer=ln bar.tiff
       $ CLASSPATH=mycode.jar ./importer-cli --transfer=com.example.MyTransfer baz.tiff

  Background imports:
  -------------------

    --auto-close            	Close completed imports immediately.

    --minutes-wait=ARG      	Choose how long the importer will wait on server-side processing.
                            	ARG > 0 implies the number of minutes to wait.
                            	ARG = 0 exits immediately. Use a *-completed option to clean up.
                            	ARG < 0 waits indefinitely. This is the default.

    --close-completed       	Close completed imports.

    --wait-completed        	Wait for all background imports to complete.


  e.g. $ bin/omero import -- --minutes-wait=0 file1.tiff file2.tiff file3.tiff
       $ ./importer-cli --minutes-wait=0 some_directory/
       $ ./importer-cli --wait-completed # Waits on all 3 imports.

  File exclusion:
  ---------------

    --exclude=filename      	Exclude files based on filename.

    --exclude=clientpath    	Exclude files based on the original path.


  e.g. $ bin/omero import --exclude=filename foo.tiff # First-time imports
       $ bin/omero import --exclude=filename foo.tiff # Second-time skips

  Import speed:
  -------------

    --checksum-algorithm=ARG	Choose a possibly faster algorithm for detecting file corruption,
                            	e.g. Adler-32 (fast), CRC-32 (fast), File-Size-64 (fast),
                            	     MD5-128, Murmur3-32, Murmur3-128,
                            	     SHA1-160 (slow, default)

  e.g. $ bin/omero import --checksum-algorithm=CRC-32 foo.tiff
       $ ./importer-cli --checksum-algorithm=Murmur3-128 bar.tiff

    --no-stats-info		Disable calculation of minima and maxima when as part of the Bio-Formats reader metadata

  e.g. $ bin/omero import -- --no-stats-info foo.tiff
       $ ./importer-cli --no-stats-info bar.tiff

  --no-thumbnails		Do not perform thumbnailing after import

  e.g. $ bin/omero import -- --no-thumbnails foo.tiff
       $ ./importer-cli --no-thumbnails bar.tiff

    --no-upgrade-check		Disable upgrade check for each import
  e.g. $ bin/omero import -- --no-upgrade-check foo.tiff
       $ ./importer-cli --no-upgrade-check bar.tiff


  Feedback:
  ---------

    --qa-baseurl=ARG	Specify the base URL for reporting feedback
  e.g. $ bin/omero import broken_image.tif -- --email EMAIL --report --upload --logs --qa-baseurl=http://qa.example.com
       $ ./importer-cli broken_image.tif --email EMAIL --report --upload --logs --qa-baseurl=http://qa.openmicroscopy.org.uk/qa

Report bugs to <ome-users@lists.openmicroscopy.org.uk>

The option for performing an in-place transfer is --transfer. A new extension point, file transfers allow a choice of which mechanism is used to get a file into OMERO.

$ bin/omero import --transfer=ln_s my_file.dv

Using session bba923bb-cf0c-4cf0-80c5-a309be523ad8 (root@localhost:4064). Idle timeout: 10.0 min. Current group: system
...[      main] INFO          ome.formats.importer.ImportConfig - OMERO Version: 5.0.0-rc1-DEV-ice35
...[      main] INFO          ome.formats.importer.ImportConfig - Bioformats version: 5.0.0-rc1-DEV-ice35 revision: 101008f date: 31 January 2014
...[      main] INFO   formats.importer.cli.CommandLineImporter - Setting transfer to ln_s
...[      main] INFO   formats.importer.cli.CommandLineImporter - Log levels -- Bio-Formats: ERROR OMERO.importer: INFO
...[      main] INFO      ome.formats.importer.ImportCandidates - Depth: 4 Metadata Level: MINIMUM
...[      main] INFO      ome.formats.importer.ImportCandidates - 1 file(s) parsed into 1 group(s) with 1 call(s) to setId in 98ms. (100ms total) [0 unknowns]
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Attempting initial SSL connection to localhost:4064
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Insecure connection requested, falling back
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Server: 5.0.0
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Client: 5.0.0-rc1-DEV-ice35
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Java Version: 1.7.0_51
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - OS Name: Linux
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - OS Arch: amd64
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - OS Version: 3.8.0-27-generic
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILESET_UPLOAD_PREPARATION
...[      main] INFO          ome.formats.importer.ImportConfig - OMERO Version: 5.0.0-rc1-DEV-ice35
...[      main] INFO          ome.formats.importer.ImportConfig - Bioformats version: 5.0.0-rc1-DEV-ice35 revision: 101008f date: 31 January 2014
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILESET_UPLOAD_START
...[      main] INFO   s.importer.transfers.SymlinkFileTransfer - Transferring /tmp/a.fake...
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILE_UPLOAD_STARTED: /tmp/a.fake
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILE_UPLOAD_COMPLETE: /tmp/a.fake
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILESET_UPLOAD_END
...[l.Client-1] INFO   ormats.importer.cli.LoggingImportMonitor - METADATA_IMPORTED Step: 1 of 5  Logfile: 24605
...[l.Client-0] INFO   ormats.importer.cli.LoggingImportMonitor - PIXELDATA_PROCESSED Step: 2 of 5  Logfile: 24605
...[l.Client-1] INFO   ormats.importer.cli.LoggingImportMonitor - THUMBNAILS_GENERATED Step: 3 of 5  Logfile: 24605
...[l.Client-0] INFO   ormats.importer.cli.LoggingImportMonitor - METADATA_PROCESSED Step: 4 of 5  Logfile: 24605
...[l.Client-1] INFO   ormats.importer.cli.LoggingImportMonitor - OBJECTS_RETURNED Step: 5 of 5  Logfile: 24605
...[l.Client-0] INFO   ormats.importer.cli.LoggingImportMonitor - IMPORT_DONE Imported file: /tmp/a.fake
Imported pixels:
5001
Other imported objects:
Fileset:4102
Image:5001
...[l.Client-0] INFO      ome.formats.importer.cli.ErrorHandler - Number of errors: 0

The only visible difference here is the line:

...formats.importer.cli.CommandLineImporter - Setting transfer to ln_s

Rather than uploading via the OMERO API, the command-line importer makes a call to the system ln command.

Transfer options

Previously, OMERO only offered the option of uploading via the API. Files were written in blocks via the RawFileStore interface. With in-place import, several options are provided out of the box as well as the ability to use your own.

“ln_s” - soft-linking

The most flexible option is soft-linking. For each file, it executes ln -s source target on the local file system. This works across file system boundaries and leaves a clear record of what file was imported:

/OMERO/ManagedRepository/root_0/2014-01/24/10-11-14.947$ ls -ltra
total 8
lrwxrwxrwx 1 omero omero   11 Jan 24 10:11 my-file.dv -> /home/demo/my-file.dv

Here you can see in the imported file set, a soft-link which belongs to the omero user, but which points to a file in the /home/demo directory.

Deleting the imported images in OMERO will delete the soft link but not the original file under /home. This could come as a surprise to users, since the deletion will effectively free no space.

Warning

The deletion of the original files under /home (or equivalent) will lead to a complete loss of the data since no copy is held in OMERO. Therefore, this method should only be used in conjunction with a properly managed and backed-up data repository. If the files are corrupted or deleted, there is no way to use OMERO to retrieve them.

“ln” - hard-linking

The safest option is hard-linking, though it cannot be used across file systems. For each file, it executes ln source target. Attempting to hard link across file system boundaries will lead to an error:

...[      main] INFO          ome.formats.importer.ImportConfig - OMERO Version: 5.0.0-rc1-DEV-ice35
...[      main] INFO          ome.formats.importer.ImportConfig - Bioformats version: 5.0.0-rc1-DEV-ice35 revision: 101008f date: 31 January 2014
...[      main] INFO   formats.importer.cli.CommandLineImporter - Setting transfer to ln
...[      main] INFO   formats.importer.cli.CommandLineImporter - Log levels -- Bio-Formats: ERROR OMERO.importer: INFO
...[      main] INFO      ome.formats.importer.ImportCandidates - Depth: 4 Metadata Level: MINIMUM
...[      main] INFO      ome.formats.importer.ImportCandidates - 1 file(s) parsed into 1 group(s) with 1 call(s) to setId in 96ms. (98ms total) [0 unknowns]
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Attempting initial SSL connection to localhost:4064
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Insecure connection requested, falling back
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Server: 5.0.0
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Client: 5.0.0-rc1-DEV-ice35
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - Java Version: 1.7.0_51
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - OS Name: Linux
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - OS Arch: amd64
...[      main] INFO       ome.formats.OMEROMetadataStoreClient - OS Version: 3.8.0-27-generic
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILESET_UPLOAD_PREPARATION
...[      main] INFO          ome.formats.importer.ImportConfig - OMERO Version: 5.0.0-rc1-DEV-ice35
...[      main] INFO          ome.formats.importer.ImportConfig - Bioformats version: 5.0.0-rc1-DEV-ice35 revision: 101008f date: 31 January 2014
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILESET_UPLOAD_START
...[      main] INFO   .importer.transfers.HardlinkFileTransfer - Transferring /tmp/a.fake...
...[      main] INFO   ormats.importer.cli.LoggingImportMonitor - FILE_UPLOAD_STARTED: /tmp/a.fake
...[      main] ERROR  .importer.transfers.HardlinkFileTransfer - transfer process returned 1
...[      main] ERROR  .importer.transfers.HardlinkFileTransfer - error in closing raw file store
omero.ResourceError: null
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) ~[na:1.7.0_51]
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) ~[na:1.7.0_51]
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45) ~[na:1.7.0_51]
    at java.lang.reflect.Constructor.newInstance(Constructor.java:526) ~[na:1.7.0_51]
    at java.lang.Class.newInstance(Class.java:374) ~[na:1.7.0_51]
    at IceInternal.BasicStream.createUserException(BasicStream.java:2615) ~[ice.jar:na]
    at IceInternal.BasicStream.access$300(BasicStream.java:12) ~[ice.jar:na]
    at IceInternal.BasicStream$EncapsDecoder10.throwException(BasicStream.java:3099) ~[ice.jar:na]
    at IceInternal.BasicStream.throwException(BasicStream.java:2077) ~[ice.jar:na]
    at IceInternal.Outgoing.throwUserException(Outgoing.java:538) ~[ice.jar:na]
    at omero.api._RawFileStoreDelM.close(_RawFileStoreDelM.java:466) ~[omero-blitz.jar:na]
    at omero.api.RawFileStorePrxHelper.close(RawFileStorePrxHelper.java:1739) ~[omero-blitz.jar:na]
    at omero.api.RawFileStorePrxHelper.close(RawFileStorePrxHelper.java:1701) ~[omero-blitz.jar:na]
    at ome.formats.importer.transfers.AbstractFileTransfer.cleanupUpload(AbstractFileTransfer.java:123) ~[omero-blitz.jar:na]
    at ome.formats.importer.transfers.AbstractExecFileTransfer.transfer(AbstractExecFileTransfer.java:63) [omero-blitz.jar:na]
    at ome.formats.importer.ImportLibrary.uploadFile(ImportLibrary.java:410) [omero-blitz.jar:na]
    at ome.formats.importer.ImportLibrary.importImage(ImportLibrary.java:465) [omero-blitz.jar:na]
    at ome.formats.importer.ImportLibrary.importCandidates(ImportLibrary.java:274) [omero-blitz.jar:na]
    at ome.formats.importer.cli.CommandLineImporter.start(CommandLineImporter.java:218) [omero-blitz.jar:na]
    at ome.formats.importer.cli.CommandLineImporter.main(CommandLineImporter.java:658) [omero-blitz.jar:na]
2014-01-31 12:59:20,338 3152       [      main] ERROR        ome.formats.importer.ImportLibrary - Error on import
java.lang.RuntimeException: transfer process returned 1
    at ome.formats.importer.transfers.AbstractExecFileTransfer.exec(AbstractExecFileTransfer.java:137) ~[omero-blitz.jar:na]
    at ome.formats.importer.transfers.AbstractExecFileTransfer.transfer(AbstractExecFileTransfer.java:57) ~[omero-blitz.jar:na]
    at ome.formats.importer.ImportLibrary.uploadFile(ImportLibrary.java:410) ~[omero-blitz.jar:na]
    at ome.formats.importer.ImportLibrary.importImage(ImportLibrary.java:465) ~[omero-blitz.jar:na]
    at ome.formats.importer.ImportLibrary.importCandidates(ImportLibrary.java:274) ~[omero-blitz.jar:na]
    at ome.formats.importer.cli.CommandLineImporter.start(CommandLineImporter.java:218) [omero-blitz.jar:na]
    at ome.formats.importer.cli.CommandLineImporter.main(CommandLineImporter.java:658) [omero-blitz.jar:na]
2014-01-31 12:59:20,338 3152       [      main] INFO         ome.formats.importer.ImportLibrary - Exiting on error

The safeness of this method comes from the fact that OMERO also has a pointer to the data. Deletion of the original file under /home would leave data in OMERO in place. Again, this could cause a surprise as the space would not be properly freed, but at least there cannot be an accidental loss.

Warning

The primary concern with this method is modification of files. If the original data is written by a user, unexpected results could follow in OMERO. See the Safety tips section above for ways around this.

If you are unclear about how hard-linking works, please see the Hard link article on Wikipedia.

The semantics of hard-linking have changed recently on Linux systems with the “protected hardlinks” feature, which is enabled by default and is in use on Ubuntu 14.04, CentOS 7 and other contemporary systems. When you create a hard-link to a file, Linux now requires that you are either the owner of the file, or that you have read-write permissions to the file. Other Unix systems, and older Linux systems, allow a hard-link to be made if you have search access to the file (i.e. you have appropriate read and execute permissions on the directory path containing the file), but do not check the file permissions themselves. See the kernel-hardening mailing list post which describes the change in more detail. The implication for in-place import is that the user performing the import must own or have read-write permissions on the data files being imported in-place.

“ln_rm” - moving

Finally, the least favored option is ln_rm. It first performs a hard-link like ln, but once the import is complete it attempts to delete the original file. This is currently in testing as an option for DropBox but is unlikely to be of use to general users. Although this option is more limited than the upload_rm option below it will be much faster.

“upload_rm” - uploading and deleting

This option is not strictly an in-place option but is detailed here for convenience. It first performs a file upload like default import, but once the import is complete it attempts to delete the original files. It deletes the original files if and only if the import is successful.

“cp” and “cp_rm” variants

The cp and cp_rm commands provide the same functionality as ln and ln_rm but perform a copy rather than a link operation. The benefit of a copy is that it works over OS filesystem boundaries while still providing the integrity that ln_s cannot. The primary downside of a raw cp compared to ln is that there is data duplication. cp_rm being very similar to ln_rm usually works around this downside, except in the case of a failed import. Then the duplicated data will remain in OMERO and an explicit cleanup step will need to be taken.

Your own file transfer

If none of the above options work for you, it is also possible to write your own implementation of the ome.formats.importer.transfers.FileTransfer class, likely subclassing ome.formats.importer.transfers.AbstractFileTransfer or ome.formats.importer.transfers.AbstractExecFileTransfer. If you do so, please let us know how we might improve either the interface or the implementations that we provide.

Once your implementation has been compiled into a jar and placed in the lib/clients directory, you can invoke it using:

$ bin/omero import --transfer=example.package.ClassName ...

Related advanced options

In addition to the --transfer option, a number of other advanced options have been added which may be useful for either tweaking import performance or dealing with complicated situations. Comments and suggestions are very welcome.

Checksums

If you think that calculating the checksums for your large files is consuming too much time, you might want to configure the checksum algorithm used. This can be done with the --checksum_algorithm property. Available options are printed with the --advanced-help option and include Adler-32, CRC-32, MD5-128, Murmur3-32, Murmur3-128, and the default SHA1-160.

DropBox

As described in the scenarios “DropBox import (automatic delete)” and “In-place DropBox import (automatic delete)”, DropBox can be configured to use any of the options described above. The configuration property to modify is omero.fs.importArgs:

$ bin/omero config set -- omero.fs.importArgs "--transfer=upload_rm"

This will move files into OMERO rather than leaving a copy in the DropBox directory.

$ bin/omero config set -- omero.fs.importArgs "--transfer=ln_rm"

This will also move files into OMERO rather than leaving a copy in the DropBox directory. For this to work, the two directories will need to be on the same file system. This option is much faster than upload_rm. Please read “ln_rm” - moving carefully to ensure you fully understand the implications of using this option.

For more information on OMERO.fs, please visit Import under OMERO.fs.

Warning

Use at your own risk!

See also

Advanced import scenarios

OMERO.dropbox

Import under OMERO.fs

Import images

Import targets

Command Line Interface as an OMERO client