Running and writing tests ========================= The following guidelines apply to tests in both the Java and Python test components. However, some of the presented options apply to only one or the other. The default build target does not compile all the required testing resources. You should run `test-compile` (or `build-dev` if you are using Eclipse) first: :: ./build.py build-default test-compile You must rebuild the `test-compile` target if you subsequently modify any of the Java tests. .. note:: The OMERO C++ components and tests are under heavy development, and are not compiled or run by the targets mentioned on this page. Running tests ------------- Running unit tests ^^^^^^^^^^^^^^^^^^ The unit testing framework is fairly simple. Only methods which contain logic written within OMERO are tested. This means that framework functionality like remoting or the Hibernate layer is not tested. This is a part of integration testing (see below). You can run the unit tests for any component from its directory by entering: :: ./build.py -f components//build.xml test The same can be done for all components using: :: ./build.py test-unit Note that for tests written in Python the package `pytest` must be installed, see :ref:`writing-python-tests`. Also note that some Python tests are excluded by default, see :ref:`using-markers-in-python-tests` for more details. Running integration tests ^^^^^^^^^^^^^^^^^^^^^^^^^ Integration testing is a bit more complex because of the reliance on a database, which is not easily mockable. All Hibernate-related classes are tested in integration mode. The tests require a fast computer. Running all the integration tests places several restrictions on the environment: - There must be a running OMERO database. - An OMERO.server instance must be running. Integration tests assume that: - :envvar:`ICE_CONFIG` has been properly set. The contents of the :file:`etc/ice.config` file should be enough to configure a running server for integration testing. This means that code creating a client connection as outlined in :doc:`GettingStarted/AdvancedClientDevelopment` should execute without errors. - An OMERO.server instance is running on the host and port specified in the :envvar:`ICE_CONFIG` file. If any of the tests fail with a user authentication exception (or ``omero.client`` throws an exception), a new :file:`ice.config` file can be created and pointed to by the :envvar:`ICE_CONFIG` environment variable. Most likely the first settings that will have to be put there will be ``omero.user`` and ``omero.pass``. Running all tests """"""""""""""""" To run all the integration tests, use :: ./build.py test-integration Note that some Python tests are excluded by default, see :ref:`using-markers-in-python-tests` for more details. Component tests """"""""""""""" Running an integration test suite for an individual component can be done explicitly via: :: ./build.py -f components//build.xml integration Results are placed in ``components//target/reports``. Individual tests """""""""""""""" Alternatively, you can run individual tests which you may currently be working on. This can be done using the ``test`` target. For example: :: ./build.py -f components/tools/OmeroJava/build.xml test -DTEST=integration/chown/PermissionsTest ./build.py -f components/tools/OmeroPy/build.xml test -DTEST=test/integration/test_admin.py Running Java tests ^^^^^^^^^^^^^^^^^^ Individual test class methods """"""""""""""""""""""""""""" Individual OmeroJava test class methods (or a comma-separated list of methods) can be run using the :option:`-DMETHODS` parameter together with the ``test`` target. The test method must be provided in the fully qualified name form (:option:`-Dpackage.class.method`). :: ./build.py -f components/tools/OmeroJava/build.xml test -DMETHODS=integration.chgrp.AnnotationMoveTest.testMoveTaggedImage Individual test groups """""""""""""""""""""" To run individual OmeroJava test groups (or comma-separated sets of groups) of tests, the :option:`-DGROUPS` parameter can be used together with the ``test`` target :: ./build.py -f components/tools/OmeroJava/build.xml test -DGROUPS=integration Using Eclipse to run tests """"""""""""""""""""""""""" To facilitate importing OMERO components into Eclipse, there are :file:`.project` and :file:`.classpath-template` files stored in each component directory (e.g. :source:`common's .classpath ` and :source:`common's .project `). There are also top-level :file:`.classpath` and :file:`.project` files which allow for importing all components as a single project, but this approach requires more memory and does not clearly differentiate the classpaths, and so can lead to confusion. Before importing any component as a project into Eclipse, a successful build has to have taken place: :: ./build.py This is for two reasons. Firstly, the Eclipse projects are not configured to perform the code generation needed. The :command:`build.py` command creates the directory: :: /target which will be missing from any Eclipse project you open before building the source. Secondly, Ivy is used to copy all the jar dependencies from ``OMERO_SOURCE_PREFIX/lib/repository`` to ``/target/libs``, which is then used in the Eclipse :file:`.classpath` files. If Eclipse ever gets out of sync after the first build, :command:`./build.py build-eclipse` can be used to quickly synchronize. A prerequisite of running unit and integration tests in the Eclipse UI is having the TestNG plug-in installed and working (help available on the `TestNG site `_). Running the unit tests under Eclipse requires no extra settings and is as easy as navigating to the package or class context menu :guilabel:`Run As` or :guilabel:`Debug As`, then selecting :guilabel:`TestNG`. Integration tests require the :envvar:`ICE_CONFIG` environment variable to be available for the Eclipse-controlled JVM. This can be done by editing Debug/Run configurations in Eclipse. After navigating to the Debug (or Run) Configurations window, the :guilabel:`Environment` tab needs to be selected. After clicking :guilabel:`New`, :envvar:`ICE_CONFIG` can be defined as a path to the :file:`ice.config` file. This setting needs to be defined per package, class or method. By using the "debug" target from templates.xml, it is possible to have OMERO listen on port 8787 for a debugging connection. :: bin/omero admin stop bin/omero admin start debug Then in Eclipse, you can create a new "Debug" configuration by clicking on :guilabel:`Remote Java Application`, and setting the port to 8787. These values are arbitrary and can be changed locally. **Keep in mind**: - The server will not start up until you have connected with Eclipse. This is due to the "suspend=y" clause in templates.xml. If you would like the server to start without you connecting, use "suspend=n". - If you take too much time examining your threads, your calls may throw timeout exceptions. Running Python tests ^^^^^^^^^^^^^^^^^^^^ .. _using-markers-in-python-tests: Using markers in OmeroPy tests """""""""""""""""""""""""""""" Tests under OmeroPy can be included or excluded according to markers defined in the tests. This can be done by using the :option:`-DMARK` option. For example, to run all the integration tests marked as ``broken``: :: ./build.py -f components/tools/OmeroPy/build.xml integration -DMARK=broken By default tests marked as ``long_running`` and ``broken`` are excluded and so the following two builds are equivalent: :: ./build.py -f components/tools/OmeroPy/build.xml integration ./build.py -f components/tools/OmeroPy/build.xml integration -DMARK="not (long_running or broken)" In order to run **all** tests, including ``long_running`` and ``broken``, an empty marker must be used: :: ./build.py -f components/tools/OmeroPy/build.xml integration -DMARK= .. seealso:: :ref:`marking-python-tests` .. _running-python-tests-directly: Running tests directly """""""""""""""""""""" When writing tests it can be more convenient, flexible and powerful to run the tests from :sourcedir:`components/tools/OmeroPy` using :program:`setup.py test`. Since Python is interpreted, tests can be written and then run without having to rebuild or restart the server. A few basic options are shown below. .. program:: setup.py test .. option:: -t , --test-path This option specifies the test suite to run. For instance to run a single test file:: cd components/tools/OmeroPy ./setup.py test -t test/integration/test_admin.py Or to run all tests under a given folder:: cd components/tools/OmeroPy ./setup.py test -t test/integration/clitest .. option:: -k This option will run all integration tests containing the given string in their names. For example, to run all the tests under :file:`test/integration` with `permissions` in their names:: ./setup.py test -t test/integration -k permissions This option can also be used to run a named test within a test module:: ./setup.py test -t test/integration/test_admin.py -k testGetGroup .. option:: -m This option will run integration tests depending on the markers they are decorated with. Available markers can be listed using the :option:`--markers` option. For example, to run all integration tests excluding those decorated with the marker `long_running`:: ./setup.py test -t test/integration -m "not long_running" .. option:: --markers This option lists available markers for decorating tests:: ./setup.py test --markers .. option:: -s This option allows the standard output to be shown on the console:: ./setup.py test -t test/integration/test_admin.py -s .. option:: -h, --help This option displays the full list of available options:: ./setup.py test -h To make use of the more advanced options available in `pytest` that are not accessible using :program:`setup.py test`, the :program:`py.test` script can be used directly. To use this :envvar:`PYTHONPATH` must contain the path to the OMERO Python libraries, see |BlitzGateway| as well as the path to the :sourcedir:`OMERO Python test library `. Alternatively, the `pytest` plugin :pypi:`pytest-pythonpath` can be used to add paths to :envvar:`PYTHONPATH` specifically for `pytest`. .. program:: py.test .. option:: --repeat This option allows to repeat tests for *number* occurences:: py.test --repeat 20 test/unit/fstest .. option:: -h, --help This option displays the full list of options:: py.test --help and ``_ for more help in running tests. Failing tests ^^^^^^^^^^^^^ The ``test.with.fail`` ant property is set to ``false`` by default, which prevents test failures from failing the build. However, it can instead be set to ``true`` to allow test failures to fail the build. For example: :: ./build.py -Dtest.with.fail=true integration Some components might provide individual targets for specific tests (e.g. OmeroJava provides the ``broken`` target for running broken tests). The :file:`build.xml` file is the reference in each component. Writing tests ------------- Writing Java tests ^^^^^^^^^^^^^^^^^^ For more information on writing tests in general see ``_. For a test to be an "integration" test, place it in the "integration" TestNG group. If a test is temporarily broken, add it to the "broken" group: :: @Test(groups = {"integration", "broken"} public void testMyStuff() { } Tests should be of the **Acceptance Test** form. The ticket number for which a test is being written should be added in the TestNG annotation: :: @Test(groups = "ticket:60") This works at either the method level (see :source:`SetsAndLinksTest.java `) or the class level (see :source:`UniqueResultTest.java `). The tests under :sourcedir:`components/tools/OmeroJava/test` will be the starting point for most Java-client developers coming to OMERO. An example skeleton for an integration test looks similar to :: @Test(groups = "integration") public class MyTest { omero.client client; @BeforeClass protected void setup() throws Exception { client = new omero.client(); client.createSession(); } @AfterClass protected void tearDown() throws Exception { client.closeSession(); } @Test public void testSimple() throws Exception { client.getSession().getAdminService().getEventContext(); } } .. _writing-python-tests: Writing Python tests ^^^^^^^^^^^^^^^^^^^^ To write and run Python tests you first need to install `pytest`: :: pip install pytest For more information on writing tests in general see ``_. Similar to the OmeroJava tests, the tests under :sourcedir:`components/tools/OmeroPy/test`, :sourcedir:`components/tools/OmeroFS/test` and :sourcedir:`components/tools/OmeroWeb/test` will be the starting point for most Python-client developers coming to OMERO. Integration tests should be placed under the :file:`integration` subfolders. The file names must begin with `test_` for the tests to be found by `pytest`. :: import omero.clients class TestExample(object) def setup_method(self, method): client = new omero.client() client.createSession() def teardown_method(self, method): client.closeSession() def testSimple(): ec = client.getSession().getAdminService().getEventContext() assert ec, "No EventContext!" .. _marking-python-tests: Marking OmeroPy tests """"""""""""""""""""" Methods, classes and functions can be decorated with `pytest` markers to allow for the selection of tests. `pytest` provides some predefined markers and markers can be simply defined as they are used. However, to centralize the use of custom markers they should be defined in :sourcedir:`components/tools/pytest.ini`. To view all available markers the :option:`--markers` option can be used with :program:`setup.py test` or :program:`py.test` as detailed in :ref:`running-python-tests-directly`. There are a small number of custom markers defined: .. glossary:: `long_running` Used to mark tests as long running. These are tests that typically take 10 minutes or more and are excluded from the daily integration builds. `broken` Used to mark broken tests. These are tests that fail consistently with no obvious quick fix. Broken tests are excluded from the main integration builds and instead are run in a separate daily build. `broken` markers should have a reason, an associated Trac ticket number or both. If there are multiple associated tickets then a comma-separated list should be used. `intermittent` Used to mark tests that fail intermittently. `intermittent` markers should have a reason, an associated Trac ticket number or both. If there are multiple associated tickets then a comma-separated list should be used. Tests marked as intermittent are included in the daily integration builds. :: import pytest class TestExample2(object): @pytest.mark.broken(reason="Asserting false", ticket="12345,67890") def testBroken(): assert False, "Bound to fail" @pytest.mark.long_running def testLongRunning(): self.somePotentiallyLongCall() @pytest.mark.intermittent(reason="Occasionally times out", ticket="98765") def testIntermittent(): self.somePotentiallyIntermittentCall() Using the Python test library """"""""""""""""""""""""""""" The :source:`OMERO Python test library ` defines an abstract ``ITest`` class that implements the connection set up as well as many methods shared amongst all Python integration tests. Each concrete instance of the ``ITest`` will initiate a connection to the server specified by the :envvar:`ICE_CONFIG` environment variable at the ``setup_class()`` level. The following objects are created by ``ITest.setup_class()`` and shared by all test methods of this class: - ``self.root`` is a client for the root user - ``self.group`` is a new group which permissions are set to ``ITest.DEFAULT_PERMS`` by default. Overriding ``DEFAULTS_PERMS`` in a subclass of ``ITest`` means the group will be created with the new permissions. - ``self.user`` is a new user and member of ``self.group`` - ``self.client`` is a client for the ``self.user`` created at class setup. Additionally, for the ``self.client`` object, different shortcuts are available: - ``self.sf`` is the non-root client session - ``self.update`` is the update service for the non-root client session - ``self.query`` is the query service for the non-root client session - ``self.ctx`` is the event context for the non-root client session. Note this corresponds to the context at creation time and should be refreshed if the context is modified. The example below inherits the ``ITest`` class and would create a read-write group by default :: from omero.testlib import ITest class TestExample(ITest): DEFAULT_PERMS = 'rwrw--' # Override default permissions def test1(): doAction(self.sf) New user and groups can be instantiated by individual tests using the ``ITest.new_user()`` and ``ITest.new_group()`` methods:: def testNewGroupOwner(): new_group = self.new_group(perms='rwa---') new_owner = self.new_use(group=new_group, owner=True) assert new_owner.id.val, "No EventContext!" New clients can be instantiated by individual tests using the ``ITest.new_client()`` or ``ITest.new_client_and_user()`` methods:: def testNewClient(): new_client = self.new_user_and_client() ec = new_client.getSession().getAdminService().getEventContext() assert ec, "No EventContext!" Images can be imported using the ``ITest.import_fake_file()`` method:: def testFileset(): # 2 images sharing a fileset images = self.import_fake_file(2) assert len(images) == 2 Writing OMERO.web tests """"""""""""""""""""""" For OMERO.web integration tests, the :source:`OMERO.web test library ` defines an abstract ``IWebTest`` class that inherits from ``ITest`` and also implements Django clients at the class setup using the :djangodoc:`Django testing tools `. On top of the elements created by ``ITest.setup_class()``, the ``IWebTest`` class creates: - ``self.django_root_client`` is a Django test client for the root user - ``self.django_client`` is a client for the new user created at the class setup. :: from omeroweb.testlib import IWebTest class TestExample(IWebTest): def testSimple(): self.django_client.post('/login/', {'username': 'john'}) New Django test clients can be instantiated by individual tests using the ``IWebTest.new_django_client()`` method:: def testNewDjangoClient(): new_user = self.new_user() omeName = new_user.omeName.val new_django_client = self.new_django_client(omeName, omeName) .. seealso:: :source:`test_simple.py ` Example test class using the OMERO.web test library methods