.. This file is auto-generated from omero.properties. DO NOT EDIT IT Configuration properties glossary ================================= .. contents:: :depth: 1 :local: .. _introduction_configuration: Introduction ------------ The primary form of configuration is via the use of key/value properties, stored in :file:`etc/grid/config.xml` and read on server startup. Backing up and copying these properties is as easy as copying this file to a new server version. The :source:`etc/omero.properties` file of your distribution defines all the default configuration properties used by the server. Changes made to the file are *not* recognized by the server. Instead, configuration options can be set using the :omerocmd:`config set` command: :: $ bin/omero config set When supplying a value with spaces or multiple elements, use **single quotes**. The quotes will not be saved as part of the value (see below). To remove a configuration option (to return to default values where mentioned), simply omit the value: :: $ bin/omero config set These options will be stored in a file: ``etc/grid/config.xml`` which you can read for reference. **DO NOT** edit this file directly. You can also review all your settings by using: :: $ bin/omero config get which should return values without quotation marks. A final useful option of :omerocmd:`config edit` is: :: $ bin/omero config edit which will allow for editing the configuration in a system-default text editor. .. note:: Please use the **escape sequence** ``\"`` for nesting double quotes (e.g. ``"[\"foo\", \"bar\"]"``) or wrap with ``'`` (e.g. ``'["foo", "bar"]'``). Examples of doing this are on the main :doc:`Unix ` and :doc:`Windows ` pages, as well as the :doc:`LDAP installation ` page. .. _core_configuration: Mandatory properties -------------------- The following properties need to be correctly set for all installations of the OMERO.server. Depending on your set-up, default values may be sufficient. - :property:`omero.data.dir` - :property:`omero.db.host` - :property:`omero.db.name` - :property:`omero.db.pass` .. _fs_configuration: Binary repository ----------------- .. property:: omero.checksum.supported omero.checksum.supported ^^^^^^^^^^^^^^^^^^^^^^^^ Checksum algorithms supported by the server for new file uploads, being any comma-separated non-empty subset of: - Adler-32 - CRC-32 - MD5-128 - Murmur3-32 - Murmur3-128 - SHA1-160 - File-Size-64 In negotiation with clients, this list is interpreted as being in descending order of preference. Default: `SHA1-160, MD5-128, Murmur3-128, Murmur3-32, CRC-32, Adler-32, File-Size-64` .. property:: omero.data.dir omero.data.dir ^^^^^^^^^^^^^^ Default: `/OMERO/` .. property:: omero.fs.repo.path omero.fs.repo.path ^^^^^^^^^^^^^^^^^^ Template for FS managed repository paths. Allowable elements are: :: %user% bob %userId% 4 %group% bobLab %groupId% 3 %year% 2011 %month% 01 %monthname% January %day% 01 %time% 15-13-54.014 %institution% University of Dundee %hash% 0D2D8DB7 %increment% 14 %subdirs% 023/613 %session% c3fdd5d8-831a-40ff-80f2-0ba5baef448a %sessionId% 592 %perms% rw---- / path separator // end of root-owned directories These are described further at :doc:`fs-upload-configuration` The path must be unique per fileset to prevent upload conflicts, which is why %time% includes milliseconds. A // may be used as a path separator: the directories preceding it are created with root ownership, the remainder are the user's. At least one user-owned directory must be included in the path. The template path is created below :property:`omero.managed.dir`, e.g. :file:`/OMERO/ManagedRepository/${omero.fs.repo.path}/` Default: `%user%_%userId%//%year%-%month%/%day%/%time%` .. property:: omero.fs.repo.path_rules omero.fs.repo.path_rules ^^^^^^^^^^^^^^^^^^^^^^^^ Rules to apply to judge the acceptability of FS paths for writing into :property:`omero.managed.dir`, being any comma-separated non-empty subset of: - Windows required - Windows optional - UNIX required - UNIX optional - local required - local optional Minimally, the "required" appropriate for the server is recommended. Also applying "optional" rules may make sysadmin tasks easier, but may be more burdensome for users who name their files oddly. "local" means "Windows" or "UNIX" depending on the local platform, the latter being applied for Linux and Mac OS X. Default: `Windows required, UNIX required` .. property:: omero.managed.dir omero.managed.dir ^^^^^^^^^^^^^^^^^ Default: `${omero.data.dir}/ManagedRepository` .. _client_configuration: Client ------ .. property:: omero.client.download_as.max_size omero.client.download_as.max_size ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Clients disable download as jpg/png/tiff above max pixel count. Default: `144000000` .. property:: omero.client.scripts_to_ignore omero.client.scripts_to_ignore ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Server-side scripts used in IScript service Clients shouldn't display. Default: `/omero/figure_scripts/Movie_Figure.py, /omero/figure_scripts/Split_View_Figure.py, /omero/figure_scripts/Thumbnail_Figure.py, /omero/figure_scripts/ROI_Split_Figure.py, /omero/export_scripts/Make_Movie.py, /omero/setup_scripts/FLIM_initialise.py, /omero/import_scripts/Populate_ROI.py` .. property:: omero.client.ui.menu.dropdown.colleagues.enabled omero.client.ui.menu.dropdown.colleagues.enabled ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Flag to show/hide colleagues Default: `true` .. property:: omero.client.ui.menu.dropdown.colleagues.label omero.client.ui.menu.dropdown.colleagues.label ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Client dropdown menu colleagues label. Default: `${omero.client.ui.menu.dropdown.colleagues}` .. property:: omero.client.ui.menu.dropdown.everyone.enabled omero.client.ui.menu.dropdown.everyone.enabled ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Flag to show/hide all users. Default: `true` .. property:: omero.client.ui.menu.dropdown.everyone.label omero.client.ui.menu.dropdown.everyone.label ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Client dropdown menu all users label. Default: `${omero.client.ui.menu.dropdown.everyone}` .. property:: omero.client.ui.menu.dropdown.leaders.enabled omero.client.ui.menu.dropdown.leaders.enabled ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Flag to show/hide leader. Default: `true` .. property:: omero.client.ui.menu.dropdown.leaders.label omero.client.ui.menu.dropdown.leaders.label ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Client dropdown menu leader label. Default: `${omero.client.ui.menu.dropdown.leaders}` .. property:: omero.client.ui.tree.orphans.description omero.client.ui.tree.orphans.description ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Description of the "Orphaned images" container. Default: `This is a virtual container with orphaned images. These images are not linked anywhere. Just drag them to the selected container.` .. property:: omero.client.ui.tree.orphans.enabled omero.client.ui.tree.orphans.enabled ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Flag to show/hide "Orphaned images" container. Only accept "true" or "false" Default: `true` .. property:: omero.client.ui.tree.orphans.name omero.client.ui.tree.orphans.name ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Name of the "Orphaned images" container located in client tree data manager. Default: `Orphaned Images` .. property:: omero.client.viewer.initial_zoom_level omero.client.viewer.initial_zoom_level ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Initial client image viewer zoom level for big images Default: `0` .. property:: omero.client.viewer.interpolate_pixels omero.client.viewer.interpolate_pixels ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Client viewers interpolate pixels by default. Default: `true` .. property:: omero.client.viewer.roi_limit omero.client.viewer.roi_limit ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Client viewers roi limit. Default: `2000` .. property:: omero.client.web.host omero.client.web.host ^^^^^^^^^^^^^^^^^^^^^ Absolute omeroweb host http(s)://your_domain/prefix/ Default: `[empty]` .. _db_configuration: Database -------- .. property:: omero.db.authority omero.db.authority ^^^^^^^^^^^^^^^^^^ The string that will be used as the base for LSIDs in all exported OME objects including OME-XML and OME-TIFF. It's usually not necessary to modify this value since the database UUID (stored in the database) is sufficient to uniquely identify the source. Default: `export.openmicroscopy.org` .. property:: omero.db.dialect omero.db.dialect ^^^^^^^^^^^^^^^^ Implementation of the org.hibernate.dialect.Dialect interface which will be used to convert HQL queries and save operations into SQL SELECTs and DML statements. (PostgreSQL default) Default: `ome.util.PostgresqlDialect` .. property:: omero.db.driver omero.db.driver ^^^^^^^^^^^^^^^ JDBC driver used to access the database. Other drivers can be configured which wrap this driver to provide logging, monitoring, etc. (PostgreSQL default) Default: `org.postgresql.Driver` .. property:: omero.db.host omero.db.host ^^^^^^^^^^^^^ The host name of the machine on which the database server is running. A TCP port must be accessible from the server on which OMERO is running. Default: `localhost` .. property:: omero.db.name omero.db.name ^^^^^^^^^^^^^ The name of the database instance to which OMERO will connect. Default: `omero` .. property:: omero.db.pass omero.db.pass ^^^^^^^^^^^^^ The password to use to connect to the database server Default: `omero` .. property:: omero.db.patch omero.db.patch ^^^^^^^^^^^^^^ The patch version of the database which is in use. This value need not match the patch version of the server that is is being used with. Any changes by developers to the database schema will result in a bump to this value. Default: `0` .. property:: omero.db.poolsize omero.db.poolsize ^^^^^^^^^^^^^^^^^ Sets the number of database server connections which will be used by OMERO. Your database installation will need to be configured to accept *at least* as many, preferably more, connections as this value. Default: `10` .. property:: omero.db.port omero.db.port ^^^^^^^^^^^^^ TCP port on which the database server is listening for connections. Used by the JDBC driver to access the database. Use of a local UNIX socket is not supported. (PostgreSQL default) Default: `5432` .. property:: omero.db.prepared_statement_cache_size omero.db.prepared_statement_cache_size ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `10` .. property:: omero.db.profile omero.db.profile ^^^^^^^^^^^^^^^^ Default values for the current profile will be hard-coded into the hibernate.properties file in the `model-*.jar`. By using a different jar, you can modify the defaults. Note: some other properties are defined in the file :file:`etc/profiles/${omero.db.profile}` Especially of importance is :property:`omero.db.port` Default: `psql` .. property:: omero.db.sql_action_class omero.db.sql_action_class ^^^^^^^^^^^^^^^^^^^^^^^^^ Implementation of the ome.util.SqlAction interface which will be used to perform all direct SQL actions, i.e. without Hibernate. (PostgreSQL default) Default: `ome.util.actions.PostgresSqlAction` .. property:: omero.db.statistics omero.db.statistics ^^^^^^^^^^^^^^^^^^^ Whether JMX statistics are collected for DB usage (by Hibernate, etc) Default: `true` .. property:: omero.db.user omero.db.user ^^^^^^^^^^^^^ The username to use to connect to the database server Default: `omero` .. property:: omero.db.version omero.db.version ^^^^^^^^^^^^^^^^ Version of the database which is in use. This value typically matches the major.minor version of the server that it is being used with. Typically, only developers will change this version to bump to a new major version. Default: `OMERO5.2` .. _grid_configuration: Grid ---- .. property:: omero.cluster.read_only omero.cluster.read_only ^^^^^^^^^^^^^^^^^^^^^^^ Default: `false` .. property:: omero.cluster.redirector omero.cluster.redirector ^^^^^^^^^^^^^^^^^^^^^^^^ Default: `nullRedirector` .. property:: omero.grid.registry_timeout omero.grid.registry_timeout ^^^^^^^^^^^^^^^^^^^^^^^^^^^ registry_timeout is the milliseconds which the registry and other services will wait on remote services to respond. Default: `5000` .. _ice_configuration: Ice --- .. property:: Ice.IPv6 Ice.IPv6 ^^^^^^^^ Disable IPv6 by setting to 0. Only needed in certain situations. Default: `1` .. _jvm_configuration: JVM --- .. property:: omero.jvmcfg.append omero.jvmcfg.append ^^^^^^^^^^^^^^^^^^^ Contains other parameters which should be passed to the JVM. The value of "append" is treated as if it were on the command-line and so will be separated on whitespace. For example, '-XX:-PrintGC -XX:+UseCompressedOops' would results in two new arguments. Default: `[empty]` .. property:: omero.jvmcfg.heap_dump omero.jvmcfg.heap_dump ^^^^^^^^^^^^^^^^^^^^^^ Toggles on or off heap dumps on OOMs. Default is "off". The special value "tmp" will create the heap dumps in your temp directory. Default: `[empty]` .. property:: omero.jvmcfg.heap_size omero.jvmcfg.heap_size ^^^^^^^^^^^^^^^^^^^^^^ Explicit value for the `-Xmx` argument, e.g. "1g" Default: `[empty]` .. property:: omero.jvmcfg.max_system_memory omero.jvmcfg.max_system_memory ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Suggestion for strategies as to the maximum memory that they will use for calculating JVM settings (MB). Default: `48000` .. property:: omero.jvmcfg.min_system_memory omero.jvmcfg.min_system_memory ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Suggestion for strategies as to the minimum memory that they will use for calculating JVM settings (MB). Default: `3414` .. property:: omero.jvmcfg.percent omero.jvmcfg.percent ^^^^^^^^^^^^^^^^^^^^ Used only by the percent strategy. An integer between 0 and 100 which is the percent of active memory that will be used by the service. Default: `[empty]` .. property:: omero.jvmcfg.perm_gen omero.jvmcfg.perm_gen ^^^^^^^^^^^^^^^^^^^^^ Explicit value for the MaxPermSize argument to the JVM, e.g. "500M". Ignored for Java8+ Default: `[empty]` .. property:: omero.jvmcfg.strategy omero.jvmcfg.strategy ^^^^^^^^^^^^^^^^^^^^^ Memory strategy which will be used by default. Options include: percent, manual Default: `percent` .. property:: omero.jvmcfg.system_memory omero.jvmcfg.system_memory ^^^^^^^^^^^^^^^^^^^^^^^^^^ Manual override of the total system memory that OMERO will *think* is present on the local OS (MB). If unset, an attempt will be made to detect the actual amount: first by using the Python library `psutil` and if that is not installed, by running a Java tool. If neither works, 4.0GB is assumed. Default: `[empty]` .. _ldap_configuration: LDAP ---- .. property:: omero.ldap.base omero.ldap.base ^^^^^^^^^^^^^^^ LDAP server base search DN, i.e. the filter that is applied to all users. (can be empty in which case any LDAP user is valid) Default: `ou=example, o=com` .. property:: omero.ldap.config omero.ldap.config ^^^^^^^^^^^^^^^^^ Enable or disable LDAP (`true` or `false`). Default: `false` .. property:: omero.ldap.group_filter omero.ldap.group_filter ^^^^^^^^^^^^^^^^^^^^^^^ Default: `(objectClass=groupOfNames)` .. property:: omero.ldap.group_mapping omero.ldap.group_mapping ^^^^^^^^^^^^^^^^^^^^^^^^ Default: `name=cn` .. property:: omero.ldap.new_user_group omero.ldap.new_user_group ^^^^^^^^^^^^^^^^^^^^^^^^^ Without a prefix the "new_user_group" property specifies the name of a single group which all new users will be added to. Other new_user_group strings are prefixed with ``:x:`` and specify various lookups which should take place to find one or more target groups for the new user. ``:ou:`` uses the final organizational unit of a user's dn as the single OMERO group e.g. ``omero.ldap.new_user_group=:ou:`` ``:attribute:`` uses all the values of the specified attribute as the name of multiple OMERO groups. e.g. ``omero.ldap.new_user_group=:attribute:memberOf`` Like ``:attribute:``, ``:filtered_attribute:`` uses all the values of the specified attribute as the name of multiple OMERO groups but the attribute must pass the same filter as ``:query:`` does. e.g. ``omero.ldap.new_user_group=:filtered_attribute:memberOf`` Similar to ``:attribute:``, ``:dn_attribute:`` uses all the values of the specified attribute as the DN of multiple OMERO groups. e.g. ``omero.ldap.new_user_group=:dn_attribute:memberOf`` A combination of filtered_attribute and dn_attribute, ``:filtered_dn_attribute:`` uses all of the values of the specified attribute as the DN of multiple OMERO groups but the attribute must pass the same filter as ``:query:`` e.g. ``omero.ldap.new_user_group=:filtered_dn_attribute:memberOf`` ``:query:`` performs a query for groups. The "name" property will be taken as defined by omero.ldap.group_mapping and the resulting filter will be AND'ed with the value group_filter (above) e.g. ``omero.ldap.new_user_group=:query:(member=@{dn})`` ``:bean:`` looks in the server's context for a bean with the given name which implements ``ome.security.auth.NewUserGroupBean`` e.g. ``omero.ldap.new_user_group=:bean:myNewUserGroupMapperBean`` Default: `default` .. property:: omero.ldap.new_user_group_owner omero.ldap.new_user_group_owner ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ A query element to check if user who is being created via the new_user_group setting should be made a "manager", i.e. owner, of the queried group. E.g. ``omero.ldap.new_user_group_owner=(owner=@{dn})`` will use the 'manager' attribute to set the 'owner' flag in the database. This query element is appened to any query used by new_user_group with an AND. This property is not used by new_user_group type 'default' and only potentially by ``:bean:``. Default: `[empty]` .. property:: omero.ldap.password omero.ldap.password ^^^^^^^^^^^^^^^^^^^ LDAP server bind password (if required; can be empty) Default: `[empty]` .. property:: omero.ldap.referral omero.ldap.referral ^^^^^^^^^^^^^^^^^^^ Available referral options are: "ignore", "follow", or "throw" as per the JNDI referral documentation. Default: `ignore` .. property:: omero.ldap.sync_on_login omero.ldap.sync_on_login ^^^^^^^^^^^^^^^^^^^^^^^^ Whether or not values from LDAP will be synchronized to OMERO on each login. This includes not just the username, email, etc, but also the groups that the user is a member of. .. note:: Admin actions carried out in the clients may not survive this synchronization e.g. LDAP users removed from an LDAP group in the UI will be re-added to the group when logging in again after the synchronization. Default: `false` .. property:: omero.ldap.urls omero.ldap.urls ^^^^^^^^^^^^^^^ Set the URL of the LDAP server. A |SSL| URL for this property would be of the form: ldaps://ldap.example.com:636 Default: `ldap://localhost:389` .. property:: omero.ldap.user_filter omero.ldap.user_filter ^^^^^^^^^^^^^^^^^^^^^^ Default: `(objectClass=person)` .. property:: omero.ldap.user_mapping omero.ldap.user_mapping ^^^^^^^^^^^^^^^^^^^^^^^ Default: `omeName=cn, firstName=givenName, lastName=sn, email=mail, institution=department, middleName=middleName` .. property:: omero.ldap.username omero.ldap.username ^^^^^^^^^^^^^^^^^^^ LDAP server bind DN (if required; can be empty) Default: `[empty]` .. _mail_configuration: Mail ---- .. property:: omero.mail.bean omero.mail.bean ^^^^^^^^^^^^^^^ Mail sender properties Default: `defaultMailSender` .. property:: omero.mail.config omero.mail.config ^^^^^^^^^^^^^^^^^ Enable or disable mail sender (`true` or `false`). Default: `false` .. property:: omero.mail.from omero.mail.from ^^^^^^^^^^^^^^^ the email address used for the "from" field Default: `omero@${omero.mail.host}` .. property:: omero.mail.host omero.mail.host ^^^^^^^^^^^^^^^ the hostname of smtp server Default: `localhost` .. property:: omero.mail.password omero.mail.password ^^^^^^^^^^^^^^^^^^^ the password to connect to the smtp server (if required; can be empty) Default: `[empty]` .. property:: omero.mail.port omero.mail.port ^^^^^^^^^^^^^^^ the port of smtp server Default: `25` .. property:: omero.mail.smtp.auth omero.mail.smtp.auth ^^^^^^^^^^^^^^^^^^^^ see javax.mail.Session properties Default: `false` .. property:: omero.mail.smtp.connectiontimeout omero.mail.smtp.connectiontimeout ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `60000` .. property:: omero.mail.smtp.debug omero.mail.smtp.debug ^^^^^^^^^^^^^^^^^^^^^ Default: `false` .. property:: omero.mail.smtp.socketFactory.class omero.mail.smtp.socketFactory.class ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `javax.net.SocketFactory` .. property:: omero.mail.smtp.socketFactory.fallback omero.mail.smtp.socketFactory.fallback ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `false` .. property:: omero.mail.smtp.socketFactory.port omero.mail.smtp.socketFactory.port ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `${omero.mail.port}` .. property:: omero.mail.smtp.starttls.enable omero.mail.smtp.starttls.enable ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `false` .. property:: omero.mail.smtp.timeout omero.mail.smtp.timeout ^^^^^^^^^^^^^^^^^^^^^^^ Default: `60000` .. property:: omero.mail.transport.protocol omero.mail.transport.protocol ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ other smtp parameters; see org.springframework.mail.javamail.JavaMailSenderImpl Default: `smtp` .. property:: omero.mail.username omero.mail.username ^^^^^^^^^^^^^^^^^^^ the username to connect to the smtp server (if required; can be empty) Default: `[empty]` .. _metrics_configuration: Metrics ------- .. property:: omero.metrics.bean omero.metrics.bean ^^^^^^^^^^^^^^^^^^ Which bean to use: nullMetrics does nothing defaultMetrics uses the properties defined below Default: `defaultMetrics` .. property:: omero.metrics.graphite omero.metrics.graphite ^^^^^^^^^^^^^^^^^^^^^^ Address for Metrics to send server data Default: `[empty]` .. property:: omero.metrics.slf4j_minutes omero.metrics.slf4j_minutes ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Number of minutes to periodically print to slf4j 0 or lower disables the printout. Default: `60` .. _performance_configuration: Performance ----------- .. property:: omero.sessions.maximum omero.sessions.maximum ^^^^^^^^^^^^^^^^^^^^^^ Default: `0` .. property:: omero.sessions.sync_force omero.sessions.sync_force ^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `1800000` .. property:: omero.sessions.sync_interval omero.sessions.sync_interval ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `120000` .. property:: omero.sessions.timeout omero.sessions.timeout ^^^^^^^^^^^^^^^^^^^^^^ Sets the duration of inactivity in milliseconds after which a login is required. Default: `600000` .. property:: omero.threads.cancel_timeout omero.threads.cancel_timeout ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `5000` .. property:: omero.threads.idle_timeout omero.threads.idle_timeout ^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `5000` .. property:: omero.threads.max_threads omero.threads.max_threads ^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `50` .. property:: omero.threads.min_threads omero.threads.min_threads ^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `5` .. property:: omero.throttling.method_time.error omero.throttling.method_time.error ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Time in milliseconds after which a single method invocation will print a ERROR statement to the server log. If ERRORs are frequently being printed to your logs, you may want to increase this value after checking that no actual problem exists. Values of more than 60000 (1 minute) are not advised. Default: `20000` .. property:: omero.throttling.method_time.error.indexer omero.throttling.method_time.error.indexer ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Value for the indexer is extended to 1 day Default: `86400000` .. property:: omero.throttling.method_time.warn omero.throttling.method_time.warn ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Time in milliseconds after which a single method invocation will print a WARN statement to the server log. Default: `5000` .. property:: omero.throttling.method_time.warn.indexer omero.throttling.method_time.warn.indexer ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Value for the indexer is extended to 1 hour Default: `3600000` .. property:: omero.throttling.objects_read_interval omero.throttling.objects_read_interval ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `1000` .. property:: omero.throttling.objects_written_interval omero.throttling.objects_written_interval ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `1000` .. property:: omero.throttling.servants_per_session omero.throttling.servants_per_session ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `10000` .. _pixeldata_configuration: Pixeldata --------- .. property:: omero.pixeldata.backoff omero.pixeldata.backoff ^^^^^^^^^^^^^^^^^^^^^^^ Name of the spring bean which will be used to calculate the backoff (in ms) that users should wait for an image to be ready to view. Default: `ome.io.nio.SimpleBackOff` .. property:: omero.pixeldata.batch omero.pixeldata.batch ^^^^^^^^^^^^^^^^^^^^^ Number of instances indexed per indexing. (Ignored by pixelDataEventLogQueue) Default: `50` .. property:: omero.pixeldata.cron omero.pixeldata.cron ^^^^^^^^^^^^^^^^^^^^ Polling frequency of the pixeldata processing. Set empty to disable pixeldata processing. .. |cron| replace:: Cron Format: seconds minutes hours day-of-month month day-of-week year (optional). For example, "0,30 * * * * ?" is equivalent to running every 30 seconds. For more information download the latest *1.x version* of the `Quartz Job Scheduler`_ and review :file:`docs/api/org/quartz/CronExpression.html` within the distribution. .. _Quartz Job Scheduler: http://www.quartz-scheduler.org/downloads/ |cron| Default: `*/4 * * * * ?` .. property:: omero.pixeldata.dispose omero.pixeldata.dispose ^^^^^^^^^^^^^^^^^^^^^^^ Whether the PixelData.dispose() method should try to clean up ByteBuffer instances which may lead to memory exceptions. See ticket #11675 for more information. Note: the property is set globally for the JVM. Default: `true` .. property:: omero.pixeldata.event_log_loader omero.pixeldata.event_log_loader ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ EventLogLoader that will be used for loading EventLogs for the action "PIXELDATA". Choices include: pixelDataEventLogQueue and the older pixelDataPersistentEventLogLoader Default: `pixelDataEventLogQueue` .. property:: omero.pixeldata.max_plane_height omero.pixeldata.max_plane_height ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `3192` .. property:: omero.pixeldata.max_plane_width omero.pixeldata.max_plane_width ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `3192` .. property:: omero.pixeldata.memoizer_wait omero.pixeldata.memoizer_wait ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Maximum time in milliseconds that file parsing can take without the parsed metadata being cached to BioFormatsCache. Default: `0` .. property:: omero.pixeldata.repetitions omero.pixeldata.repetitions ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Instead, it is possible to tell the server to run more pixeldata repetitions, each of which gets completely committed before the next. This will only occur when there is a substantial backlog of pixels to process. (Ignored by pixelDataEventLogQueue; uses threads instead) Default: `1` .. property:: omero.pixeldata.threads omero.pixeldata.threads ^^^^^^^^^^^^^^^^^^^^^^^ How many pixel pyramids will be generated at a single time. The value should typically not be set to higher than the number of cores on the server machine. Default: `2` .. property:: omero.pixeldata.tile_height omero.pixeldata.tile_height ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `256` .. property:: omero.pixeldata.tile_sizes_bean omero.pixeldata.tile_sizes_bean ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default sizes for tiles are provided by a ome.io.nio.TileSizes implementation. By default the bean ("configuredTileSizes") uses the properties provided here. Default: `configuredTileSizes` .. property:: omero.pixeldata.tile_width omero.pixeldata.tile_width ^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `256` .. _policy_configuration: Policy ------ .. property:: omero.policy.bean omero.policy.bean ^^^^^^^^^^^^^^^^^ Instance of the PolicyService interface which will be responsible for checking certain server actions made by a user. Default: `defaultPolicyService` .. property:: omero.policy.binary_access omero.policy.binary_access ^^^^^^^^^^^^^^^^^^^^^^^^^^ Configuration for the policy of whether users can access binary files from disk. Binary access includes all attempts to download a file from the UI. The individual components of the string include: - write - whether or not users who have WRITE access to the objects can access the binary. This includes group and system administrators. - read - whether or not users who have READ access to the objects can access the binary. - image - whether or not images are to be considered accessible as a rule. - plate - whether or not plates and contained HCS objects are to be considered accessible as a rule. This includes wells, well samples, and plate runs. Though the order of the components of the property are not important, the order that they are listed above roughly corresponds to their priority. E.g. a -write value will override +plate. Example 1: "-read,+write,+image,-plate" only owners of an image and admins can download it. Example 2: "-read,-write,-image,-plate" no downloading is possible. Configuration properties of the same name can be applied to individual groups as well. E.g. adding, omero.policy.binary_access=-read to a group, you can prevent group-members from downloading original files. Configuration is pessimistic: if there is a negative *either* on the group *or* at the server-level, the restriction will be applied. A missing value at the server restricts the setting but allows the server to override. Default: `+read, +write, +image` .. _ports_configuration: Ports ----- .. property:: omero.ports.prefix omero.ports.prefix ^^^^^^^^^^^^^^^^^^ The prefix to apply to all port numbers (SSL, TCP, registry) used by the server Default: `[empty]` .. property:: omero.ports.registry omero.ports.registry ^^^^^^^^^^^^^^^^^^^^ The IceGrid registry port number to use Default: `4061` .. property:: omero.ports.ssl omero.ports.ssl ^^^^^^^^^^^^^^^ The Glacier2 SSL port number to use Default: `4064` .. property:: omero.ports.tcp omero.ports.tcp ^^^^^^^^^^^^^^^ The Glacier2 TCP port number to use Default: `4063` .. _scripts_configuration: Scripts ------- .. property:: omero.launcher.jython omero.launcher.jython ^^^^^^^^^^^^^^^^^^^^^ Executable on the PATH which will be used for scripts with the mimetype 'text/x-jython'. Default: `jython` .. property:: omero.launcher.matlab omero.launcher.matlab ^^^^^^^^^^^^^^^^^^^^^ Executable on the PATH which will be used for scripts with the mimetype 'text/x-matlab'. Default: `matlab` .. property:: omero.launcher.python omero.launcher.python ^^^^^^^^^^^^^^^^^^^^^ Executable on the PATH which will be used for scripts with the mimetype 'text/x-python'. No value implies use sys.executable Default: `[empty]` .. property:: omero.process.jython omero.process.jython ^^^^^^^^^^^^^^^^^^^^ Server implementation which will be used for scripts with the mimetype 'text/x-jython'. Changing this value requires that the appropriate class has been installed on the server. Default: `omero.processor.ProcessI` .. property:: omero.process.matlab omero.process.matlab ^^^^^^^^^^^^^^^^^^^^ Server implementation which will be used for scripts with the mimetype 'text/x-matlab'. Changing this value requires that the appropriate class has been installed on the server. Default: `omero.processor.MATLABProcessI` .. property:: omero.process.python omero.process.python ^^^^^^^^^^^^^^^^^^^^ Server implementation which will be used for scripts with the mimetype 'text/x-python'. Changing this value requires that the appropriate class has been installed on the server. Default: `omero.processor.ProcessI` .. property:: omero.scripts.cache.cron omero.scripts.cache.cron ^^^^^^^^^^^^^^^^^^^^^^^^ Frequency to reload script params. By default, once a day at midnight. |cron| Default: `0 0 0 * * ?` .. property:: omero.scripts.cache.spec omero.scripts.cache.spec ^^^^^^^^^^^^^^^^^^^^^^^^ Guava LoadingCache spec for configuring how many script JobParams will be kept in memory for how long. For more information, see http://google.github.io/guava/releases/17.0/api/docs/com/google/common/cache/CacheBuilderSpec.html Default: `maximumSize=1000` .. property:: omero.scripts.timeout omero.scripts.timeout ^^^^^^^^^^^^^^^^^^^^^ Default: `3600000` .. _search_configuration: Search ------ .. property:: omero.search.analyzer omero.search.analyzer ^^^^^^^^^^^^^^^^^^^^^ Analyzer used both index and to parse queries Default: `ome.services.fulltext.FullTextAnalyzer` .. property:: omero.search.batch omero.search.batch ^^^^^^^^^^^^^^^^^^ Size of the batches to process events per indexing. Larger batches can speed up indexing, but at the cost of memory. Default: `5000` .. property:: omero.search.bridges omero.search.bridges ^^^^^^^^^^^^^^^^^^^^ Extra bridge classes, comma-separated, to be invoked on each indexing. Bridges are used to parse more information out of the data. Default: `[empty]` .. property:: omero.search.cron omero.search.cron ^^^^^^^^^^^^^^^^^ Polling frequency of the indexing. Set empty to disable search indexing. |cron| Default: `*/2 * * * * ?` .. property:: omero.search.event_log_loader omero.search.event_log_loader ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `eventLogQueue` .. property:: omero.search.excludes omero.search.excludes ^^^^^^^^^^^^^^^^^^^^^ Indexing takes place on all EventLogs as they occur in the database. The types listed here will be skipped if they appear in the "entityType" field of the EventLog table. Default: `ome.model.annotations.ChannelAnnotationLink, ome.model.core.Channel, ome.model.core.PlaneInfo, ome.model.core.PixelsOriginalFileMap, ome.model.containers.DatasetImageLink, ome.model.containers.ProjectDatasetLink, ome.model.containers.CategoryGroupCategoryLink, ome.model.containers.CategoryImageLink, ome.model.display.ChannelBinding, ome.model.display.QuantumDef, ome.model.display.Thumbnail, ome.model.meta.Share, ome.model.meta.Event, ome.model.meta.EventLog, ome.model.meta.GroupExperimenterMap, ome.model.meta.Node, ome.model.meta.Session, ome.model.annotations.RoiAnnotationLink, ome.model.roi.Roi, ome.model.roi.Shape, ome.model.roi.Text, ome.model.roi.Rectangle, ome.model.roi.Mask, ome.model.roi.Ellipse, ome.model.roi.Point, ome.model.roi.Path, ome.model.roi.Polygon, ome.model.roi.Polyline, ome.model.roi.Line, ome.model.screen.ScreenAcquisitionWellSampleLink, ome.model.screen.ScreenPlateLink, ome.model.screen.WellReagentLink, ome.model.stats.StatsInfo` .. property:: omero.search.include_actions omero.search.include_actions ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ EventLog.action values which will be indexed. Unless custom code is generating other action types, this property should not need to be modified. Default: `INSERT, UPDATE, REINDEX, DELETE` .. property:: omero.search.include_types omero.search.include_types ^^^^^^^^^^^^^^^^^^^^^^^^^^ Whitelist of object types which will be indexed. All other types will be ignored. This matches the currently available UI options but may need to be expanded for custom search bridges. Default: `ome.model.core.Image, ome.model.containers.Project, ome.model.containers.Dataset, ome.model.screen.Plate, ome.model.screen.Screen, ome.model.screen.PlateAcquisition` .. property:: omero.search.locking_strategy omero.search.locking_strategy ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `native` .. property:: omero.search.max_file_size omero.search.max_file_size ^^^^^^^^^^^^^^^^^^^^^^^^^^ Maximum file size for text indexing (bytes) If a file larger than this is attached, e.g. to an image, the indexer will simply ignore the contents of the file when creating the search index. This should not be set to more than half of the Indexer heap space. .. note:: If you set the max file size to greater than 1/2 the size of the indexer's heap (256 MB by default), you may encounter Out of Memory errors in the Indexer process or you may cause the search index to become corrupt. Be sure that you also increase the heap size accordingly (see :ref:`out_of_memory_error`). Default: `131072000` .. property:: omero.search.max_partition_size omero.search.max_partition_size ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Number of objects to load in a single indexing window. The larger this value the fewer times a single object will be indexed unnecessarily. Each object uses roughly 100 bytes of memory. Default: `1000000` .. property:: omero.search.maxclause omero.search.maxclause ^^^^^^^^^^^^^^^^^^^^^^ Maximum number of OR-clauses to which a single search can expand Default: `4096` .. property:: omero.search.merge_factor omero.search.merge_factor ^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `25` .. property:: omero.search.ram_buffer_size omero.search.ram_buffer_size ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `64` .. property:: omero.search.repetitions omero.search.repetitions ^^^^^^^^^^^^^^^^^^^^^^^^ Instead, it is possible to tell the server to run more indexing repetitions, each of which gets completely committed before the next. This will only occur when there is a substantial backlog of searches to perform. (More than 1 hours worth) Default: `1` .. property:: omero.search.reporting_loops omero.search.reporting_loops ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Periodically the completion percentage will be printed. The calculation can be expensive and so is not done frequently. Default: `100` .. _security_configuration: Security -------- .. property:: omero.security.chmod_strategy omero.security.chmod_strategy ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `groupChmodStrategy` .. property:: omero.security.filter.bitand omero.security.filter.bitand ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `(int8and(permissions, %s) = %s)` .. property:: omero.security.keyStore omero.security.keyStore ^^^^^^^^^^^^^^^^^^^^^^^ A keystore is a database of private keys and their associated X.509 certificate chains authenticating the corresponding public keys. A keystore is mostly needed if you are doing client-side certificates for authentication against your LDAP server. Default: `[empty]` .. property:: omero.security.keyStorePassword omero.security.keyStorePassword ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Sets the password of the keystore Default: `[empty]` .. property:: omero.security.login_failure_throttle_count omero.security.login_failure_throttle_count ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `1` .. property:: omero.security.login_failure_throttle_time omero.security.login_failure_throttle_time ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `3000` .. property:: omero.security.password_provider omero.security.password_provider ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Implementation of PasswordProvider that will be used to authenticate users. Typically, a chained password provider will be used so that if one form of authentication (e.g. LDAP) does not work, other attempts will be made. Default: `chainedPasswordProvider` .. property:: omero.security.password_required omero.security.password_required ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Controls whether the server will allow creation of user accounts with an empty password. If set to true (default, strict mode), empty passwords are disallowed. This still allows the guest user to interact with the server. Default: `true` .. property:: omero.security.trustStore omero.security.trustStore ^^^^^^^^^^^^^^^^^^^^^^^^^ A truststore is a database of trusted entities and their associated X.509 certificate chains authenticating the corresponding public keys. The truststore contains the Certificate Authority (CA) certificates and the certificate(s) of the other party to which this entity intends to send encrypted (confidential) data. This file must contain the public key certificates of the CA and the client's public key certificate. Default: `[empty]` .. property:: omero.security.trustStorePassword omero.security.trustStorePassword ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Sets the password of the truststore Default: `[empty]` .. _web_configuration: Web --- .. property:: omero.web.admins omero.web.admins ^^^^^^^^^^^^^^^^ A list of people who get code error notifications whenever the application identifies a broken link or raises an unhandled exception that results in an internal server error. This gives the administrators immediate notification of any errors, see :doc:`/sysadmins/mail`. Example:``'[["Full Name", "email address"]]'``. Default: `[]` .. property:: omero.web.application_server omero.web.application_server ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ OMERO.web is configured to run in Gunicorn as a generic WSGI application by default. If you are using Apache change this to "wsgi" before generating your web server configuration. Available options: "wsgi-tcp" (Gunicorn), "wsgi" (Apache) Default: `wsgi-tcp` .. property:: omero.web.application_server.host omero.web.application_server.host ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Upstream application host Default: `127.0.0.1` .. property:: omero.web.application_server.max_requests omero.web.application_server.max_requests ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The maximum number of requests a worker will process before restarting. Default: `0` .. property:: omero.web.application_server.port omero.web.application_server.port ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Upstream application port Default: `4080` .. property:: omero.web.apps omero.web.apps ^^^^^^^^^^^^^^ Add additional Django applications. For example, see :doc:`/developers/Web/CreateApp` Default: `[]` .. property:: omero.web.caches omero.web.caches ^^^^^^^^^^^^^^^^ OMERO.web offers alternative session backends to automatically delete stale data using the cache session store backend, see :djangodoc:`Django cached session documentation ` for more details. Default: `{"default": {"BACKEND": "django.core.cache.backends.dummy.DummyCache"}}` .. property:: omero.web.chunk_size omero.web.chunk_size ^^^^^^^^^^^^^^^^^^^^ Size, in bytes, of the “chunk” Default: `1048576` .. property:: omero.web.databases omero.web.databases ^^^^^^^^^^^^^^^^^^^ Default: `{}` .. property:: omero.web.debug omero.web.debug ^^^^^^^^^^^^^^^ A boolean that turns on/off debug mode. Default: `false` .. property:: omero.web.index_template omero.web.index_template ^^^^^^^^^^^^^^^^^^^^^^^^ Define template used as an index page ``http://your_host/omero/``.If None user is automatically redirected to the login page.For example use 'webclient/index.html'. Default: `None` .. property:: omero.web.logdir omero.web.logdir ^^^^^^^^^^^^^^^^ A path to the custom log directory. Default: `/home/omero/OMERO.server/var/log` .. property:: omero.web.login_logo omero.web.login_logo ^^^^^^^^^^^^^^^^^^^^ Customize webclient login page with your own logo. Logo images should ideally be 150 pixels high or less and will appear above the OMERO logo. You will need to host the image somewhere else and link to it with ``"http://www.openmicroscopy.org/site/logo.jpg"``. Default: `None` .. property:: omero.web.login_redirect omero.web.login_redirect ^^^^^^^^^^^^^^^^^^^^^^^^ Redirect to the given location after logging in. It only supports arguments for :djangodoc:`Django reverse function `. For example: ``'{"redirect": ["webindex"], "viewname": "load_template", "args":["userdata"], "query_string": "experimenter=-1"}'`` Default: `{}` .. property:: omero.web.login_view omero.web.login_view ^^^^^^^^^^^^^^^^^^^^ Default: `weblogin` .. property:: omero.web.page_size omero.web.page_size ^^^^^^^^^^^^^^^^^^^ Number of images displayed within a dataset or 'orphaned' container to prevent from loading them all at once. Default: `200` .. property:: omero.web.ping_interval omero.web.ping_interval ^^^^^^^^^^^^^^^^^^^^^^^ Timeout interval between ping invocations in seconds Default: `60000` .. property:: omero.web.pipeline_css_compressor omero.web.pipeline_css_compressor ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Compressor class to be applied to CSS files. If empty or None, CSS files won't be compressed. Default: `None` .. property:: omero.web.pipeline_js_compressor omero.web.pipeline_js_compressor ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Compressor class to be applied to JavaScript files. If empty or None, JavaScript files won't be compressed. Default: `None` .. property:: omero.web.pipeline_staticfile_storage omero.web.pipeline_staticfile_storage ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The file storage engine to use when collecting static files with the collectstatic management command. See `the documentation `_ for more details. Default: `pipeline.storage.PipelineStorage` .. property:: omero.web.prefix omero.web.prefix ^^^^^^^^^^^^^^^^ Used as the value of the SCRIPT_NAME environment variable in any HTTP request. Default: `None` .. property:: omero.web.public.cache.enabled omero.web.public.cache.enabled ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `false` .. property:: omero.web.public.cache.key omero.web.public.cache.key ^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `omero.web.public.cache.key` .. property:: omero.web.public.cache.timeout omero.web.public.cache.timeout ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `86400` .. property:: omero.web.public.enabled omero.web.public.enabled ^^^^^^^^^^^^^^^^^^^^^^^^ Enable and disable the OMERO.web public user functionality. Default: `false` .. property:: omero.web.public.password omero.web.public.password ^^^^^^^^^^^^^^^^^^^^^^^^^ Password to use during authentication. Default: `None` .. property:: omero.web.public.server_id omero.web.public.server_id ^^^^^^^^^^^^^^^^^^^^^^^^^^ Server to authenticate against. Default: `1` .. property:: omero.web.public.url_filter omero.web.public.url_filter ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Set a URL filter for which the OMERO.web public user is allowed to navigate. The idea is that you can create the public pages yourself (see OMERO.web framework since we do not provide public pages. Default: `^/(?!webadmin)` .. property:: omero.web.public.user omero.web.public.user ^^^^^^^^^^^^^^^^^^^^^ Username to use during authentication. Default: `None` .. property:: omero.web.secret_key omero.web.secret_key ^^^^^^^^^^^^^^^^^^^^ A boolean that sets SECRET_KEY for a particular Django installation. Default: `None` .. property:: omero.web.secure_proxy_ssl_header omero.web.secure_proxy_ssl_header ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ A tuple representing a HTTP header/value combination that signifies a request is secure. Example ``'["HTTP_X_FORWARDED_PROTO_OMERO_WEB", "https"]'``. For more details see :djangodoc:`secure proxy ssl header `. Default: `[]` .. property:: omero.web.server_list omero.web.server_list ^^^^^^^^^^^^^^^^^^^^^ A list of servers the Web client can connect to. Default: `[["localhost", 4064, "omero"]]` .. property:: omero.web.session_cookie_age omero.web.session_cookie_age ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The age of session cookies, in seconds. Default: `86400` .. property:: omero.web.session_cookie_domain omero.web.session_cookie_domain ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The domain to use for session cookies Default: `None` .. property:: omero.web.session_cookie_name omero.web.session_cookie_name ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The name to use for session cookies Default: `None` .. property:: omero.web.session_engine omero.web.session_engine ^^^^^^^^^^^^^^^^^^^^^^^^ Controls where Django stores session data. See :djangodoc:`Configuring the session engine for more details `. Default: `omeroweb.filesessionstore` .. property:: omero.web.session_expire_at_browser_close omero.web.session_expire_at_browser_close ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ A boolean that determines whether to expire the session when the user closes their browser. See :djangodoc:`Django Browser-length sessions vs. persistent sessions documentation ` for more details. Default: `true` .. property:: omero.web.static_root omero.web.static_root ^^^^^^^^^^^^^^^^^^^^^ The absolute path to the directory where collectstatic will collect static files for deployment. If the staticfiles contrib app is enabled (default) the collectstatic management command will collect static files into this directory. Default: `/home/omero/OMERO.server/lib/python/omeroweb/static` .. property:: omero.web.static_url omero.web.static_url ^^^^^^^^^^^^^^^^^^^^ URL to use when referring to static files. Example: ``'/static/'`` or ``'http://static.example.com/'``. Used as the base path for asset definitions (the Media class) and the staticfiles app. It must end in a slash if set to a non-empty value. Default: `/static/` .. property:: omero.web.staticfile_dirs omero.web.staticfile_dirs ^^^^^^^^^^^^^^^^^^^^^^^^^ Defines the additional locations the staticfiles app will traverse if the FileSystemFinder finder is enabled, e.g. if you use the collectstatic or findstatic management command or use the static file serving view. Default: `[]` .. property:: omero.web.template_dirs omero.web.template_dirs ^^^^^^^^^^^^^^^^^^^^^^^ List of locations of the template source files, in search order. Note that these paths should use Unix-style forward slashes, even on Windows. Default: `[]` .. property:: omero.web.ui.center_plugins omero.web.ui.center_plugins ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Add plugins to the center panels. Plugins are ``['Channel overlay', 'webtest/webclient_plugins/center_plugin.overlay.js.html', 'channel_overlay_panel']``. The javascript loads data into ``$('#div_id')``. Default: `[]` .. property:: omero.web.ui.right_plugins omero.web.ui.right_plugins ^^^^^^^^^^^^^^^^^^^^^^^^^^ Add plugins to the right-hand panel. Plugins are ``['Label', 'include.js', 'div_id']``. The javascript loads data into ``$('#div_id')``. Default: `[["Acquisition", "webclient/data/includes/right_plugin.acquisition.js.html", "metadata_tab"],["Preview", "webclient/data/includes/right_plugin.preview.js.html", "preview_tab"]]` .. property:: omero.web.ui.top_links omero.web.ui.top_links ^^^^^^^^^^^^^^^^^^^^^^ Add links to the top header: links are ``['Link Text', 'link', options]``, where the url is reverse('link') OR simply 'link' (for external urls). E.g. ``'[["Webtest", "webtest_index"], ["Homepage", "http://...", {"title": "Homepage", "target": "new"} ]]'`` Default: `[["Data", "webindex", {"title": "Browse Data via Projects, Tags etc"}],["History", "history", {"title": "History"}],["Help", "http://help.openmicroscopy.org/",{"title":"Open OMERO user guide in a new tab", "target":"new"}]]` .. property:: omero.web.use_x_forwarded_host omero.web.use_x_forwarded_host ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Specifies whether to use the X-Forwarded-Host header in preference to the Host header. This should only be enabled if a proxy which sets this header is in use. Default: `false` .. property:: omero.web.viewer.view omero.web.viewer.view ^^^^^^^^^^^^^^^^^^^^^ Django view which handles display of, or redirection to, the desired full image viewer. Default: `omeroweb.webclient.views.image_viewer` .. property:: omero.web.webgateway_cache omero.web.webgateway_cache ^^^^^^^^^^^^^^^^^^^^^^^^^^ Default: `None` .. property:: omero.web.wsgi_args omero.web.wsgi_args ^^^^^^^^^^^^^^^^^^^ A string representing Gunicorn additional arguments. Check Gunicorn Documentation http://docs.gunicorn.org/en/latest/settings.html Default: `None` .. property:: omero.web.wsgi_timeout omero.web.wsgi_timeout ^^^^^^^^^^^^^^^^^^^^^^ Workers silent for more than this many seconds are killed and restarted. Check Gunicorn Documentation http://docs.gunicorn.org/en/stable/settings.html#timeout Default: `60` .. property:: omero.web.wsgi_workers omero.web.wsgi_workers ^^^^^^^^^^^^^^^^^^^^^^ The number of worker processes for handling requests. Check Gunicorn Documentation http://docs.gunicorn.org/en/stable/settings.html#workers Default: `5`